LMPTP inhibitor 1 dihydrochloride
Based on 1 Customer Validation
LMPTP INHIBITOR 1 (dihydrochloride) is a selective inhibitor of low molecular weight protein tyrosine phosphatase (LMPTP), with an IC50 of 0.8 μM LMPTP-A.
For research use only. We do not sell to patients.
- Purity : 99.83%
- CAS No.: 2310135-46-5
- Formula: C28H38Cl2N4O
- Molecular Weight:517.53
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Protocols
- Purity & Documentation
- References
-
Help & FAQs
-
HY-D0852
Sodium orthovanadateProtein Tyrosine/Alkaline Phosphatase Inhibitor -
HY-151591
SPAA-52LMW-PTP Inhibitor -
HY-15832
GSK 2830371Wip1 Phosphatase Inhibitor -
HY-19776
3α-AminocholestanePhosphatase Inhibitor -
HY-15969
Sal003eIF2α Phophatase Inhibitor -
HY-109011
RosiptorSHIP1 Activator -
HY-123960
Raphin1Phosphatase Inhibitor -
HY-19695
(-)-p-Bromotetramisole oxalateAlkaline Phosphatase Inhibitor -
HY-101510
F1063-0967DUSP26 Inhibitor -
HY-123960A
Raphin1 acetatePhosphatase Inhibitor -
HY-18983
Calyculin APhosphatase Inhibitor -
HY-100463
TPI-1SHP-1 Inhibitor
Biological Activity
Description
IC50 & Target
IC50: 0.8 μM (LMPTP-A)[1]
In Vitro
LMPTP INHIBITOR 1 (dihydrochloride) is a selective inhibitor of low molecular weight protein tyrosine phosphatase, with an IC50 of 0.8 μM LMPTP-A and shows more potent effect on LMPTP-A versus LMPTP-B. LMPTP inhibitor 1 (Compound 23; 10 μM) also enhances HepG2 IR phosphorylation after insulin stimulation in human HepG2 hepatocytes[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2310135-46-5
-
Appearance Solid
-
Molecular Weight 517.53
-
Formula C28H38Cl2N4O
-
Color Off-white to light yellow
-
SMILES
O=C(N(CC)CC)C1=CC=C(C2=NC3=CC=CC=C3C(NCCCN4CCCCC4)=C2)C=C1.Cl.Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
DMSO : ≥ 64 mg/mL (123.66 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (96.61 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (193.23 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Protocols
-
Cell Cytotoxicity Assay
Cytotoxicity assays are usually based on the assessment of cell membrane damage, which can also be indirectly detected by measuring cell viability. Detection methods include MTT assay, CKK-8 assay, LDH assay and ATP assay, etc.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.9323 mL | 9.6613 mL | 19.3226 mL | 48.3064 mL |
| 5 mM | 0.3865 mL | 1.9323 mL | 3.8645 mL | 9.6613 mL | |
| 10 mM | 0.1932 mL | 0.9661 mL | 1.9323 mL | 4.8306 mL | |
| 15 mM | 0.1288 mL | 0.6441 mL | 1.2882 mL | 3.2204 mL | |
| 20 mM | 0.0966 mL | 0.4831 mL | 0.9661 mL | 2.4153 mL | |
| 25 mM | 0.0773 mL | 0.3865 mL | 0.7729 mL | 1.9323 mL | |
| 30 mM | 0.0644 mL | 0.3220 mL | 0.6441 mL | 1.6102 mL | |
| 40 mM | 0.0483 mL | 0.2415 mL | 0.4831 mL | 1.2077 mL | |
| 50 mM | 0.0386 mL | 0.1932 mL | 0.3865 mL | 0.9661 mL | |
| 60 mM | 0.0322 mL | 0.1610 mL | 0.3220 mL | 0.8051 mL | |
| 80 mM | 0.0242 mL | 0.1208 mL | 0.2415 mL | 0.6038 mL | |
| DMSO | 100 mM | 0.0193 mL | 0.0966 mL | 0.1932 mL | 0.4831 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
LMPTP inhibitor 1 dihydrochloride Related Classifications
HY-111489B Related Classifications
Powered by Bioz