AC-262536
Based on 1 publication(s) in Google Scholar
AC-262536 is a selective and non-steroidal androgen receptor modulators (SARMs) with beneficial anabolic effects. AC-262536 exhibits potent agonist activity at the androgen receptor, with an affinity in the low nanomolar range (1-10 nM).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 99.49%
- CAS. Nr.: 870888-46-3
- Formel: C18H18N2O
- Molecular Weight:278.35
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-112257
S-23Selective Androgen Receptor Modulator -
HY-112256
ACP-105Androgen Receptor Modulator -
HY-14383
VosilasarmAndrogen Receptor Modulator -
HY-13273
OstarineSARMs -
HY-12023
GTx-007Androgen Receptor SARM -
HY-114530
LY2452473Androgen Receptor Modulator -
HY-B0561
SpironolactoneAldosterone/Corticoid Receptor/Androgen Antagonists -
HY-B0561R
Spironolactone (Standard) -
HY-107480
YK11Androgen Receptor Partial Agonist -
HY-70002
EnzalutamideAndrogen Receptor Antagonist -
HY-138641
BavdegalutamideAR PROTAC Degrader -
HY-14249
BicalutamideAndrogen Receptor Inhibitor
Publications Citing Use of MedChemExpress (MCE) AC-262536
More
Biologische Aktivität
Beschreibung
In Vitro
AC-262536 dose-dependently inhibits dihydroxytestosterone (DHT)-induced proliferation of LNCaP. The effects are significant with 100 nM AC-262536 (%inhibition 47.2±12.2), and reaches a plateau with 1 μM treatment (%inhibition 50.7±7.6). Thus, AC-262536 can act as a functional antagonist in prostate cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley rats (200-225 g)[1]
-
Dosage:3, 10 and 30 mg/kg
-
Administration:Administered subcutaneously; once daily for 14 consecutive days
-
Result:Significantly decreased LH levels by about 40% at the 3 mg/kg dose.
The ED50 was determined to be 2.8 mg/kg.
At the 10 and 30 mg/kg doses, the effects of AC-262536 were significantly stronger than Testosterone Propionate (TP) : 1.91±0.32 ng/mL and 1.53±0.34 ng/mL vs. 3.12±0.69 ng/mL, respectively.
Chemical Information
-
CAS. Nr. 870888-46-3
-
Appearance Solid
-
Molecular Weight 278.35
-
Formel C18H18N2O
-
Color White to off-white
-
SMILES
O[C@@H]1C[C@H]2N(C3=CC=C(C#N)C4=C3C=CC=C4)[C@@H](C1)CC2
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Rapid Commun Mass Spectrom
Electrospray ionisation mass spectrometry (ESI-MS) adduct formation by mobile phase additives: A case study using nitrile functional groups containing selective androgen receptor modulators (SARMs). [Abstract]2023 Jul 30;37(14):e9530. PMID: 37125537
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 50 mg/mL (179.63 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.56 mg/mL (2.01 mM); Clear solution
This protocol yields a clear solution of ≥ 0.56 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.6 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
-
Research Protocol for Endocrine Diseases
Endocrine diseases often arise from disrupted hormone production, hormone signaling, or target-tissue responsiveness; for diabetes-focused endocrine disease models, insulin signaling regulates glucose uptake, hepatic glucose output, lipid metabolism, and β-cell compensation. Type 2 diabetes develops through interacting defects in insulin resistance, β-cell dysfunction, adipose inflammation, hepatic glucose overproduction, altered incretin signaling, and ectopic lipid metabolism. A major unresolved question is whether endocrine dysfunction is driven primarily by target-tissue insulin resistance, intrinsic β-cell failure, immune/inflammatory stress, or combined multi-organ failure that differs by disease stage.
Reinheit & Dokumentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5926 mL | 17.9630 mL | 35.9260 mL | 89.8150 mL |
| 5 mM | 0.7185 mL | 3.5926 mL | 7.1852 mL | 17.9630 mL | |
| 10 mM | 0.3593 mL | 1.7963 mL | 3.5926 mL | 8.9815 mL | |
| 15 mM | 0.2395 mL | 1.1975 mL | 2.3951 mL | 5.9877 mL | |
| 20 mM | 0.1796 mL | 0.8981 mL | 1.7963 mL | 4.4907 mL | |
| 25 mM | 0.1437 mL | 0.7185 mL | 1.4370 mL | 3.5926 mL | |
| 30 mM | 0.1198 mL | 0.5988 mL | 1.1975 mL | 2.9938 mL | |
| 40 mM | 0.0898 mL | 0.4491 mL | 0.8981 mL | 2.2454 mL | |
| 50 mM | 0.0719 mL | 0.3593 mL | 0.7185 mL | 1.7963 mL | |
| 60 mM | 0.0599 mL | 0.2994 mL | 0.5988 mL | 1.4969 mL | |
| 80 mM | 0.0449 mL | 0.2245 mL | 0.4491 mL | 1.1227 mL | |
| 100 mM | 0.0359 mL | 0.1796 mL | 0.3593 mL | 0.8981 mL |
AC-262536 Related Classifications
HY-122025 Related Classifications
Powered by Bioz