β-Amyloid (35-42)
Based on 1 Customer Validation
β-Amyloid (35-42) is a peptide consisting of amino acid of 35 to 42 of beta amyloid protein.
For research use only. We do not sell to patients.
- Purity: 98.00%
- CAS No.: 183292-41-3
- Formula: C33H60N8O9S
- Molecular Weight:744.94
-
Storage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* The compound is unstable in solutions, freshly prepared is recommended.
Biological Activity
β-Amyloid Aggregation Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).
1. Solid Aβ peptide was dissolved in cold hexafluoro-2-propanol (HFIP). The peptide was incubated at room temperature for at least 1h to establish monomerization and randomization of structure.
2. The HFIP was removed by evaporation, and the resulting peptide was stored as a film at -20 or -80 °C.
3. The resulting film was dissolved in anhydrous DMSO at 5 mM and then diluted into the appropriate concentration and buffer (serum- and phenol red-free culture medium) with vortexing.
4. Next, the solution was age 48h at 4-8 °C. The sample was then centrifuged at 14000g for 10 min at 4-8 °C; the soluble oligomers were in the supernatant. The supernatant was diluted 10-200-fold for experiments.
Methods vary depends on the downstream applications.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 183292-41-3
-
Appearance Solid
-
Molecular Weight 744.94
-
Formula C33H60N8O9S
-
Color White to off-white
-
Sequence
Met-Val-Gly-Gly-Val-Val-Ile-Ala
-
Sequence Shortening
MVGGVVIA
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * The compound is unstable in solutions, freshly prepared is recommended.
Solvent & Solubility
DMSO : 50 mg/mL (67.12 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (3.36 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.3424 mL | 6.7119 mL | 13.4239 mL | 33.5597 mL |
| 5 mM | 0.2685 mL | 1.3424 mL | 2.6848 mL | 6.7119 mL | |
| 10 mM | 0.1342 mL | 0.6712 mL | 1.3424 mL | 3.3560 mL | |
| 15 mM | 0.0895 mL | 0.4475 mL | 0.8949 mL | 2.2373 mL | |
| 20 mM | 0.0671 mL | 0.3356 mL | 0.6712 mL | 1.6780 mL | |
| 25 mM | 0.0537 mL | 0.2685 mL | 0.5370 mL | 1.3424 mL | |
| 30 mM | 0.0447 mL | 0.2237 mL | 0.4475 mL | 1.1187 mL | |
| 40 mM | 0.0336 mL | 0.1678 mL | 0.3356 mL | 0.8390 mL | |
| 50 mM | 0.0268 mL | 0.1342 mL | 0.2685 mL | 0.6712 mL | |
| 60 mM | 0.0224 mL | 0.1119 mL | 0.2237 mL | 0.5593 mL |