ACT-777991
Based on 1 Customer Validation
ACT-777991 is an orally active and selective CXCR3 antagonist. ACT-777991 has microsomes and hepatocytes stability across animal models. ACT-777991 inhibits the migration of activated T cells toward CXCL11.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.49%
- CAS. Nr.: 1967811-46-6
- Formel: C20H20F6N8O2S
- Molecular Weight:550.48
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
|
CXCR3 |
ACT-777991 inhibits hEGR with an IC50 value of 26 μM in CHO cells[1].
ACT-777991 (1 μM; 45 min) is stable in microsomes and hepatocytes across humans, rats, and dogs[1].
ACT-777991 (0.01-1 μM; ) inhibits the migration of both human and mouse-activated T cells toward CXCL11 with IC50s range of 3.2-64 nM and 4.9-21 nM, respectively[1].
ACT-777991 (1 nM, 5 nM, 20 nM, and 50 nM) inhibits CXCR3-mediated chemotaxis of human and mouse T cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
ACT-777991 (0.006-2 mg/g food; po; started 3 days before and 72 h post LPS challenge) dose-dependently inhibits chemotaxis of CXCR3+ T cells in vivo in mouse model[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:LPS challenge model in mice[1]
-
Dosage:0.006, 0.02, 0.06, 0.2, 0.6, and 2 mg per g of food
-
Administration:PO; started 3 days before LPS challenge and continued up to the end of the study (72 h post LPS challenge)
-
Result:Reduced the number of BAL CD8+ T cells in a dose-dependent manner.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 1967811-46-6
-
Appearance Solid
-
Molecular Weight 550.48
-
Formel C20H20F6N8O2S
-
Color White to off-white
-
SMILES
OCC[C@@H](N(C(CN1C=NC(C)=N1)=O)CC2)CN2C(SC(C(F)(F)F)=N3)=C3C4=CN=C(C(F)(F)F)N=C4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (181.66 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8166 mL | 9.0830 mL | 18.1660 mL | 45.4149 mL |
| 5 mM | 0.3633 mL | 1.8166 mL | 3.6332 mL | 9.0830 mL | |
| 10 mM | 0.1817 mL | 0.9083 mL | 1.8166 mL | 4.5415 mL | |
| 15 mM | 0.1211 mL | 0.6055 mL | 1.2111 mL | 3.0277 mL | |
| 20 mM | 0.0908 mL | 0.4541 mL | 0.9083 mL | 2.2707 mL | |
| 25 mM | 0.0727 mL | 0.3633 mL | 0.7266 mL | 1.8166 mL | |
| 30 mM | 0.0606 mL | 0.3028 mL | 0.6055 mL | 1.5138 mL | |
| 40 mM | 0.0454 mL | 0.2271 mL | 0.4541 mL | 1.1354 mL | |
| 50 mM | 0.0363 mL | 0.1817 mL | 0.3633 mL | 0.9083 mL | |
| 60 mM | 0.0303 mL | 0.1514 mL | 0.3028 mL | 0.7569 mL | |
| 80 mM | 0.0227 mL | 0.1135 mL | 0.2271 mL | 0.5677 mL | |
| 100 mM | 0.0182 mL | 0.0908 mL | 0.1817 mL | 0.4541 mL |
ACT-777991 Related Classifications
HY-149055 Related Classifications
Powered by Bioz