4-Pentynoic acid
Based on 1 Customer Validation
4-Pentynoic acid (Propargylacetic acid) is an intermediate to produce biologically active compounds. 4-Pentynoic acid is widely utilized as a building block for the synthesis of eight sequence-defined model oligomers. 4-Pentynoic acid is a click chemistry reagent, it contains an Alkyne group and can undergo copper-catalyzed azide-alkyne cycloaddition (CuAAc) with molecules containing Azide groups.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.38%
- CAS No.: 6089-09-4
- Formule: C5H6O2
- Masse moléculaire:98.10
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Click chemistry is used to describe the selective, modular, wide range and high-yield chemical reactions that allow rapid synthesis of new compounds through heteroatom linking (C-X-C). Bertozzi developed click chemistry in a new dimension —Bioorthogonal chemistry. It is defined as a rapid and selective reaction that does not interfere with biological processes under physiological conditions. Common reaction structures of click chemistry, such as Azide, Alkyne, DBCO, BCN, TCO and Tetrazine.?
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 6089-09-4
-
Appearance <54°C Solid,>57°C Liquid
-
Masse moléculaire 98.10
-
Formule C5H6O2
-
Color White to light yellow
-
SMILES
C#CCCC(O)=O
-
Synonyms
Propargylacetic acid
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (1019.37 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (12.74 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (12.74 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (476 KB)
- English - EN (476 KB)
- Français - FR (476 KB)
- Deutsch - DE (476 KB)
- Norwegian - NO (476 KB)
- Español - ES (476 KB)
- Swedish - SV (476 KB)
- Italian - IT (476 KB)
- Korean - KR (476 KB)
- Portuguese - PT (476 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 10.1937 mL | 50.9684 mL | 101.9368 mL | 254.8420 mL |
| 5 mM | 2.0387 mL | 10.1937 mL | 20.3874 mL | 50.9684 mL | |
| 10 mM | 1.0194 mL | 5.0968 mL | 10.1937 mL | 25.4842 mL | |
| 15 mM | 0.6796 mL | 3.3979 mL | 6.7958 mL | 16.9895 mL | |
| 20 mM | 0.5097 mL | 2.5484 mL | 5.0968 mL | 12.7421 mL | |
| 25 mM | 0.4077 mL | 2.0387 mL | 4.0775 mL | 10.1937 mL | |
| 30 mM | 0.3398 mL | 1.6989 mL | 3.3979 mL | 8.4947 mL | |
| 40 mM | 0.2548 mL | 1.2742 mL | 2.5484 mL | 6.3711 mL | |
| 50 mM | 0.2039 mL | 1.0194 mL | 2.0387 mL | 5.0968 mL | |
| 60 mM | 0.1699 mL | 0.8495 mL | 1.6989 mL | 4.2474 mL | |
| 80 mM | 0.1274 mL | 0.6371 mL | 1.2742 mL | 3.1855 mL | |
| 100 mM | 0.1019 mL | 0.5097 mL | 1.0194 mL | 2.5484 mL |
4-Pentynoic acid Related Classifications
HY-Y1230 Related Classifications
Powered by Bioz