Casein Kinase II Inhibitor IV
Based on 1 Customer Validation
Casein Kinase II Inhibitor IV is a potent, ATP-competitive of casein kinase II inhibitor with an IC50 of 9 nM. Casein Kinase II Inhibitor IV ia also a human keratinocytes (NHEK) differentiation inducer.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.0%
- CAS No.: 863598-09-8
- Formule: C24H23N5O3
- Masse moléculaire:429.47
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Activité biologique
Target: Casein Kinase[1]
Treatment of human epidermal keratinocytes (NHEKs) with Casein Kinase II Inhibitor IV leads to an increase in the early differentiation markers keratins 1 and 10 at 48 h. Increased levels of IVL and TGM are observed in cells treated with Casein Kinase II Inhibitor IV at 72 h and persisted at 96 h. In addition, treated with Casein Kinase II Inhibitor IV expressesloricrin, a terminal differentiation marker, at later time points. Similar results are observed by messenger RNA (mRNA) expression analysis of NHEKs treated with Casein Kinase II Inhibitor IV. At early time points (12 and 24 h), treatment with Casein Kinase II Inhibitor IV leads to the upregulation of keratinocyte early differentiation marker genes, including keratin 1 (5.4-fold) and keratin 10 (5.4-fold). Terminal differentiation marker genes, including IVL (1.8-fold), TGM 1 (4.8-fold), loricrin (3.3-fold), and filaggrin (5.6-fold), are upregulated at late time points (36 and 48 h). These results are again consistent with the ability of Casein Kinase II Inhibitor IV to induce differentiation of epidermal progenitor cells into terminally differentiated keratinocytes[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 863598-09-8
-
Appearance Solid
-
Masse moléculaire 429.47
-
Formule C24H23N5O3
-
Color Light yellow to yellow
-
SMILES
N#CCCC1=CC=CC(N2C=CC3=CN=C(NC4=CC(OC)=C(OC)C(OC)=C4)N=C32)=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 33.33 mg/mL (77.61 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
For reporter gene assays with transiently transfected cells, the cells are typically transfected in 150 mm-diam dishes when 30-40% confluent. A reporter plasmid, pGL3/3.7 kbp-IVLLuc plasmid, is transfected into the NHEKs. After 24 h, the transfected cells are plated into 96-well assay plates and treated with compound (Casein Kinase II Inhibitor IV) to a final concentration of 5 μM. After incubation for 2 d, reporter gene activity is measured using the Bright-Glo luciferase assay system[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3285 mL | 11.6423 mL | 23.2845 mL | 58.2113 mL |
| 5 mM | 0.4657 mL | 2.3285 mL | 4.6569 mL | 11.6423 mL | |
| 10 mM | 0.2328 mL | 1.1642 mL | 2.3285 mL | 5.8211 mL | |
| 15 mM | 0.1552 mL | 0.7762 mL | 1.5523 mL | 3.8808 mL | |
| 20 mM | 0.1164 mL | 0.5821 mL | 1.1642 mL | 2.9106 mL | |
| 25 mM | 0.0931 mL | 0.4657 mL | 0.9314 mL | 2.3285 mL | |
| 30 mM | 0.0776 mL | 0.3881 mL | 0.7762 mL | 1.9404 mL | |
| 40 mM | 0.0582 mL | 0.2911 mL | 0.5821 mL | 1.4553 mL | |
| 50 mM | 0.0466 mL | 0.2328 mL | 0.4657 mL | 1.1642 mL | |
| 60 mM | 0.0388 mL | 0.1940 mL | 0.3881 mL | 0.9702 mL |