hPL-IN-2
Based on 1 Customer Validation
hPL-IN-2 (compound 2u) is a potent, reversible, and non-competitive inhibitor of pancreatic lipase (IC50: 1.63 μM) and can be used in anti-obesity research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.17%
- CAS No.: 24900-61-6
- Formule: C19H11Cl4NO3
- Masse moléculaire:443.11
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
IC50: 1.63 μM (Pancreatic lipase, PL); Ki：1.7 μM (human PL)[1]
Chemical Information
-
CAS No. 24900-61-6
-
Appearance Solid
-
Masse moléculaire 443.11
-
Formule C19H11Cl4NO3
-
Color Off-white to light yellow
-
SMILES
O=C(NC1=CC=C(OC2=CC=C(Cl)C=C2)C(Cl)=C1)C3=CC(Cl)=CC(Cl)=C3O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (225.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.64 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2568 mL | 11.2839 mL | 22.5678 mL | 56.4194 mL |
| 5 mM | 0.4514 mL | 2.2568 mL | 4.5136 mL | 11.2839 mL | |
| 10 mM | 0.2257 mL | 1.1284 mL | 2.2568 mL | 5.6419 mL | |
| 15 mM | 0.1505 mL | 0.7523 mL | 1.5045 mL | 3.7613 mL | |
| 20 mM | 0.1128 mL | 0.5642 mL | 1.1284 mL | 2.8210 mL | |
| 25 mM | 0.0903 mL | 0.4514 mL | 0.9027 mL | 2.2568 mL | |
| 30 mM | 0.0752 mL | 0.3761 mL | 0.7523 mL | 1.8806 mL | |
| 40 mM | 0.0564 mL | 0.2821 mL | 0.5642 mL | 1.4105 mL | |
| 50 mM | 0.0451 mL | 0.2257 mL | 0.4514 mL | 1.1284 mL | |
| 60 mM | 0.0376 mL | 0.1881 mL | 0.3761 mL | 0.9403 mL | |
| 80 mM | 0.0282 mL | 0.1410 mL | 0.2821 mL | 0.7052 mL | |
| 100 mM | 0.0226 mL | 0.1128 mL | 0.2257 mL | 0.5642 mL |
Powered by Bioz