SB-216
Based on 1 Customer Validation
SB-216 is an BBB-penetrable tubulin polymerization inhibitor. SB-216 can inhibit the proliferation and migration, and induce apoptosis and cell cycle arrest of tumor cells. SB-216 has good in vivo metabolic stability and low toxicity, but its oral bioavailability is limited. SB-216 has antitumor activity and can be used in the research of tumors such as melanoma.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.68%
- CAS No.: 2756818-39-8
- Formule: C17H18N4O2
- Masse moléculaire:310.35
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Description
IC50 & Target
IC50: tubulin polymerization[1]
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A-375 | IC50 |
1.4 nM
Compound: 5m
|
Antiproliferative activity against human A-375 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human A-375 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| A375/TxR | IC50 |
1.1 nM
Compound: 5m
|
Antiproliferative activity against human A375/TxR cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human A375/TxR cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| A549 | IC50 |
4.5 nM
Compound: 5m
|
Antiproliferative activity against human A549 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human A549 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| A549/TR | IC50 |
2.8 nM
Compound: 5m
|
Antiproliferative activity against human A549/Taxol cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human A549/Taxol cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| M14 | IC50 |
1.4 nM
Compound: 5m
|
Antiproliferative activity against human M14 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human M14 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| MDA-MB-231 | IC50 |
4 nM
Compound: 5m
|
Antiproliferative activity against human MDA-MB-231 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human MDA-MB-231 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| MDA-MB-453 | IC50 |
0.5 nM
Compound: 5m
|
Antiproliferative activity against human MDA-MB-453 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human MDA-MB-453 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| MDA-MB-468 | IC50 |
1.8 nM
Compound: 5m
|
Antiproliferative activity against human MDA-MB-468 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human MDA-MB-468 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
| RPMI-7951 | IC50 |
1.5 nM
Compound: 5m
|
Antiproliferative activity against human RPMI-7951 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
Antiproliferative activity against human RPMI-7951 cells assessed as inhibition of cell proliferation measured after 72 hrs by MTS assay
|
[PMID: 34406768] |
In Vitro
SB-216 (Compound 5m) (1-5 nM; 4-72 h) inhibits the viability of melanoma, breast cancer, and lung cancer cell lines (IC50: 0.5-4.5 nM), and suppresses cell migration, induces apoptosis, and causes cell cycle arrest in A375/TxR cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NSG mice aged 6-8 weeks old (225-250 g) treated A375/TxR melanoma cells[1]
-
Dosage:2 and 4 mg/kg
-
Administration:Intravenous injection via tail vein, twice weekly for 3 weeks
-
Result:Suppressed tumor growth throughout the study period.
Dose-dependently reduced spontaneous lung and liver metastases.
Had good tolerability in mice without obvious adverse reactions.
Chemical Information
-
CAS No. 2756818-39-8
-
Appearance Solid
-
Masse moléculaire 310.35
-
Formule C17H18N4O2
-
Color White to off-white
-
SMILES
O=C1NC2=C(C=CC(OC)=C2)N(C3=C(CCC4)C4=NC(C)=N3)C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 62.5 mg/mL (201.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
-
Apoptosis
Apoptosis, also called programmed cell death, is generally characterized by distinct morphological characteristics.
-
TUNEL staining for apoptotic DNA fragmentation
TUNEL staining detects DNA strand breaks by using terminal deoxynucleotidyl transferase to add labeled nucleotides to exposed 3′-OH DNA termini, generating either microscopic staining in fixed cells or tissue sections, or fluorescence/cytometric signal in cell suspensions. TUNEL positivity reflects DNA fragmentation but should not be interpreted alone as definitive apoptosis, because TUNEL can also label necrotic, autolytic, mechanically damaged, or DNA-repair-associated DNA breaks.
-
Flow cytometric DNA-content cell-cycle staining
Flow cytometric DNA-content cell-cycle staining measures the fluorescence intensity of DNA-bound fluorochromes in single cells or nuclei to estimate DNA content distributions, allowing assignment of populations to G0/G1, S, and G2/M phases by DNA histogram deconvolution. Propidium iodide (PI) intercalates into DNA, and PI fluorescence is proportional to cellular DNA content when staining is performed under conditions that make DNA accessible and minimize non-DNA signal. Cells with G2/M DNA content are expected to show approximately twice the fluorescence intensity of G0/G1 cells, while S-phase cells occupy intermediate fluorescence values. PI-based DNA-content analysis can also detect cells with fractional DNA content, often reported as sub-G1, when DNA fragmentation and extraction during staining reduce retained DNA signal in apoptotic cells. DAPI is an alternative DNA fluorochrome for univariate DNA-content analysis, while bivariate approaches combining DNA content with proliferation
-
Annexin V plus membrane-impermeant dye apoptosis staining
Annexin V-based apoptosis assays rely on the detection of phosphatidylserine (PS) externalization from the inner leaflet of the plasma membrane to the outer leaflet, an early biochemical hallmark of apoptosis. Fluorescently labeled Annexin V binds PS in a calcium-dependent manner, enabling identification of early apoptotic cells by flow cytometry or fluorescence microscopy. When combined with a membrane-impermeant DNA-binding dye (e. g. , propidium iodide), this approach allows discrimination between viable (Annexin V−/dye−), early apoptotic (Annexin V+/dye−), and late apoptotic or necrotic (Annexin V+/dye+) cell populations by assessing membrane integrity and PS exposure.
-
Cell migration
Cell migration is a method that plays an important role in wound healing, cell differentiation, embryonic development, etc.
-
BrdU Incorporation Assay
Bromodeoxyuridine (BrdU) incorporation assay is based on the principle that BrdU, a thymidine analog, is incorporated into newly synthesized DNA during the S phase of the cell cycle, thereby serving as a marker of DNA replication and cellular proliferation. Incorporated BrdU can be detected using anti-BrdU antibodies following DNA denaturation, enabling visualization or quantification of proliferating cells through immunochemical detection methods such as immunofluorescence or immunohistochemistry.
-
Protocol for Pharmacokinetic Study
Pharmacokinetic studies quantify how an organism handles a drug over time through absorption, distribution, metabolism, and excretion, and the core experimental readout is the concentration-time profile of parent drug and, when relevant, metabolites in biological matrices such as plasma, whole blood, urine, bile, or tissue. Pharmacokinetic analysis links dose, route, exposure, clearance, half-life, distribution, bioavailability, and systemic exposure to drug efficacy and toxicity hypotheses rather than measuring a signaling pathway directly. The literature links pharmacokinetics to drug-development phenotypes by showing that drug metabolism and pharmacokinetics influence compound progression, exposure-response interpretation, safety margins, dosing strategy, and failure risk during discovery and development. DMPK science contributes to compound optimization by integrating physicochemical properties, in vitro metabolism, transporter behavior, in vivo exposure, and pharmacodynamic contex
-
Apoptosis Solutions
Apoptosis is a regulated, generally non-lytic cell-death pathway that removes unwanted, damaged, infected, or abnormal cells through coordinated morphological changes, caspase activation, DNA fragmentation, and membrane remodeling. The intrinsic apoptosis pathway is controlled mainly by mitochondrial outer membrane permeabilization, BCL-2 family proteins, cytochrome c release, apoptosome formation, caspase-9 activation, and downstream executioner caspase-3/7 activation. The extrinsic apoptosis pathway is initiated by death receptors such as Fas, TNFR, and TRAIL receptors, which recruit adaptor proteins and activate caspase-8 before engaging executioner caspases or mitochondrial amplification through BID cleavage. Apoptosis is linked to many phenotypes, including cancer cell killing, tissue homeostasis, immune regulation, neurodegeneration, infection response, and treatment-induced cytotoxicity; unresolved questions include how apoptosis interacts with necroptosis, pyroptosis, ferroptos
-
Protocol for Cell Cycle
Cell-cycle analysis by flow cytometry measures DNA content in single cells to estimate the fraction of cells in G0/G1, S, and G2/M phases. Propidium iodide intercalates into DNA, and after RNA removal with RNase, fluorescence intensity reflects cellular DNA content: 2N cells are assigned to G0/G1, cells between 2N and 4N to S phase, and 4N cells to G2/M. DNA-content analysis alone cannot reliably separate G0 from G1 or G2 from M. Ki-67 can distinguish quiescent G0 cells from cycling cells, EdU or BrdU incorporation marks active DNA synthesis in S phase, and phospho-histone H3 staining identifies mitotic cells within the 4N population.
-
Subcutaneous Cell-Line-Derived Xenograft
Subcutaneous cell-line-derived xenograft (CDX) models are established by implanting cultured human cancer cell lines into immunodeficient mice, where the injected cells form localized tumors that can be monitored in vivo as a measure of tumorigenic potential, growth kinetics, and treatment response. These models are widely used in oncology research because they allow reproducible tumor formation and enable comparative assessment of tumor growth between different cell lines or genetic manipulations in a controlled in vivo microenvironment. Subcutaneous implantation of cancer cells in immunodeficient mice is a standard approach for evaluating tumor growth behavior and therapeutic response across multiple cancer types, including prostate, esophageal, pancreatic, and colon cancer models.
-
Cell Viability Determination by MTT Colorimetric Assay
The following protocol uses the MTT colorimetric assay as a classic literature-established method for assessing cell viability/metabolic activity in cultured mammalian cells. MTT[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] is reduced by metabolically active cells to a colored formazan product; the amount of formazan is quantified spectrophotometrically and provides an indirect measure of metabolically active viable cells. Importantly, MTT reduction reflects cellular oxidoreductase/metabolic activity rather than an absolute direct count of living cells, so changes in cellular metabolism can alter the signal independently of cell number.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2222 mL | 16.1108 mL | 32.2217 mL | 80.5542 mL |
| 5 mM | 0.6444 mL | 3.2222 mL | 6.4443 mL | 16.1108 mL | |
| 10 mM | 0.3222 mL | 1.6111 mL | 3.2222 mL | 8.0554 mL | |
| 15 mM | 0.2148 mL | 1.0741 mL | 2.1481 mL | 5.3703 mL | |
| 20 mM | 0.1611 mL | 0.8055 mL | 1.6111 mL | 4.0277 mL | |
| 25 mM | 0.1289 mL | 0.6444 mL | 1.2889 mL | 3.2222 mL | |
| 30 mM | 0.1074 mL | 0.5370 mL | 1.0741 mL | 2.6851 mL | |
| 40 mM | 0.0806 mL | 0.4028 mL | 0.8055 mL | 2.0139 mL | |
| 50 mM | 0.0644 mL | 0.3222 mL | 0.6444 mL | 1.6111 mL | |
| 60 mM | 0.0537 mL | 0.2685 mL | 0.5370 mL | 1.3426 mL | |
| 80 mM | 0.0403 mL | 0.2014 mL | 0.4028 mL | 1.0069 mL | |
| 100 mM | 0.0322 mL | 0.1611 mL | 0.3222 mL | 0.8055 mL |
SB-216 Related Classifications
HY-144898 Related Classifications
Powered by Bioz