Glucagon receptor antagonist-3
Based on 1 Customer Validation
Glucagon receptor antagonist-3 is a highly potent glucagon receptor antagonist.
For research use only. We do not sell to patients.
- Purity: 99.78%
- CAS No.: 202917-17-7
- Formula: C22H30FNO2
- Molecular Weight:359.48
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biological Activity
Chemical Information
-
CAS No. 202917-17-7
-
Appearance Solid
-
Molecular Weight 359.48
-
Formula C22H30FNO2
-
Color White to off-white
-
SMILES
CC(C1=NC(C(C)C)=C([C@]([C@]2=CC=C(C=C2O)F)=C1[C@@H](C)O)CCC)C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : ≥ 100 mg/mL (278.18 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3 mg/mL (8.35 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7818 mL | 13.9090 mL | 27.8180 mL | 69.5449 mL |
| 5 mM | 0.5564 mL | 2.7818 mL | 5.5636 mL | 13.9090 mL | |
| 10 mM | 0.2782 mL | 1.3909 mL | 2.7818 mL | 6.9545 mL | |
| 15 mM | 0.1855 mL | 0.9273 mL | 1.8545 mL | 4.6363 mL | |
| 20 mM | 0.1391 mL | 0.6954 mL | 1.3909 mL | 3.4772 mL | |
| 25 mM | 0.1113 mL | 0.5564 mL | 1.1127 mL | 2.7818 mL | |
| 30 mM | 0.0927 mL | 0.4636 mL | 0.9273 mL | 2.3182 mL | |
| 40 mM | 0.0695 mL | 0.3477 mL | 0.6954 mL | 1.7386 mL | |
| 50 mM | 0.0556 mL | 0.2782 mL | 0.5564 mL | 1.3909 mL | |
| 60 mM | 0.0464 mL | 0.2318 mL | 0.4636 mL | 1.1591 mL | |
| 80 mM | 0.0348 mL | 0.1739 mL | 0.3477 mL | 0.8693 mL | |
| 100 mM | 0.0278 mL | 0.1391 mL | 0.2782 mL | 0.6954 mL |