NVP-ACC789
Based on 1 Customer Validation
NVP-ACC789 is an inhibitor of human VEGFR-1, VEGFR-2 (mouse VEGFR-2), VEGFR-3 and PDGFR-β with IC50s of 0.38, 0.02 (0.23), 0.18, 1.4 μM, respectively.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.52%
- CAS No.: 300842-64-2
- 화학식: C21H17BrN4
- 분자량:405.29
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
HY-10065
AxitinibTyrosine Kinase Inhibitor -
HY-12018
Vatalanib dihydrochlorideVEGFR2/KDR Inhibitor -
HY-11106
Nintedanib esylatePDGFR/VEGFR/FGFR Inhibitor -
HY-109019
VorolanibVEGFR/PDGFR Inhibitor -
HY-B1016
TrapidilVasodilator/Antiplatelet Agent -
HY-10981
LenvatinibVEGFR/FGFR Inhibitor -
HY-12050
CP-673451PDGFR Inhibitor -
HY-10374
SemaxinibFlk-1/KDR Inhibitor -
HY-10330
ToceranibRTK Inhibitor -
HY-10981A
Lenvatinib mesylatec-Kit Inhibitor -
HY-13302
CP-547632VEGFR-2/FGF Inhibitor -
HY-116624
MAZ51VEGFR-3 Inhibitor
All VEGFR Isoforms
More
Biological Activity
제품 설명
IC50 & Target
[1]|
VEGFR-2 0.02 μM (IC50) |
VEGFR-1 0.38 μM (IC50) |
mVEGFR-2 0.23 μM (IC50) |
VEGFR-3 0.18 μM (IC50) |
PDGFR-β 1.4 μM (IC50) |
In Vitro
The enzymatic kinase assays demonstrate that NVP-ACC789 is an inhibitor of human VEGFR-1, VEGFR-2 (mouse VEGFR-2), VEGFR-3 and PDGFR-β with IC50s of 0.38, 0.02 (0.23), 0.18, 1.4 μM, respectively. In VEGF-treated cultures, addition of the VEGFR-2 inhibitor NVP-ACC789 reduces BME cell number to baseline levels from 1 μM. Likewise, bFGF-induced BME cell proliferation is reduced markedly by NVP-ACC789 from 1 to 10 μM, without however reaching basal levels. NVP-ACC789 is found to be a potent inhibitor of VEGF-induced HUVE cell proliferation with an IC50 of 1.6 nM. NVP-ACC789 also completely inhibits VEGF-induced BME and BAE cell invasion and VEGF-C-induced BAE cell invasion. The inhibition is dose-dependent in both cell types with a maximal effect from 1 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 300842-64-2
-
Appearance Solid
-
분자량 405.29
-
화학식 C21H17BrN4
-
Color Light yellow to yellow
-
SMILES
CC1=CC=C(NC2=NN=C(CC3=CC=NC=C3)C4=C2C=CC=C4)C=C1Br
-
Synonyms
ACC-789; ZK202650
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
용액&용해도
In Vitro:
DMSO : 25 mg/mL (61.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.17 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Kinase Assay[1]
Human VEGFR-2-transfected CHO cells are seeded into 6-well plates and grown to about 80% confluency. NVP-ACC789 is added in serial dilutions and the cells incubated for 2 h at 37°C in medium without fetal calf serum (FCS). VEGF (20 ng/mL) is then added. After a 5-min incubation at 37°C, the cells are washed twice with ice-cold phosphate-buffered saline and lysed. Nuclei are removed by centrifugation for 10 min at 4°C. Protein concentrations of the lysates are determined[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cell Assay[1]
HUVE cell proliferation is determined. Cells are seeded into 1.5% gelatin-coated 96-well plates (5×103 cells per well) and incubated in endothelial cell growth medium containing 5% fetal calf serum (FCS) for 24 h. The medium is replaced with essential basic medium (1.5% FCS), and the cells are incubated for another 24 h. Essential basic medium is then replaced with fresh medium containing either 50 ng/mL VEGF or 0.5 ng/mL bFGF. NVP-ACC789 is added just before addition of growth factors. The cells are incubated for a further 24 h before adding the BrdU labeling solution. Twenty four hours later, the labeling solution is removed, the cells are fixed, and the incorporated BrdU is visualized with a peroxidase-labeled anti-BrdU antibody and TMB substrate[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Animal Administration[1]
Porous Teflon chambers (volume, 0.5 mL) filled with 0.8% w/v agar-containing heparin (20 U/mL) with or without VEGF (2 μg/mL) or bFGF (0.3 μg/mL) are implanted subcutaneously on the dorsal flank of female mice. The mice are treated with NVP-ACC789 (p.o. once daily) or vehicle (5% dimethyl sulfoxide, 1% Tween 80 in water) starting 1 day before implantation of the chamber and continuing for 5 days thereafter. At the end of the treatment period, the mice are killed, and the chambers are removed. The vascularized tissue growing around the chamber is removed carefully and weighed, and the blood content is assessed by measuring hemoglobin levels. The percentage inhibition of the angiogenic response (increase in tissue weight or total blood) is calculated. EC50 values are estimated from the dose response curves (% inhibition versus dose). Each experiment is performed with six animals per dose group and each dose is tested in at least two independent experiments[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (279 KB)
-
SDS (643 KB)
- English - EN (643 KB)
- Français - FR (643 KB)
- Deutsch - DE (643 KB)
- Norwegian - NO (643 KB)
- Español - ES (643 KB)
- Swedish - SV (643 KB)
- Italian - IT (643 KB)
- Korean - KR (643 KB)
- Portuguese - PT (643 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4674 mL | 12.3368 mL | 24.6737 mL | 61.6842 mL |
| 5 mM | 0.4935 mL | 2.4674 mL | 4.9347 mL | 12.3368 mL | |
| 10 mM | 0.2467 mL | 1.2337 mL | 2.4674 mL | 6.1684 mL | |
| 15 mM | 0.1645 mL | 0.8225 mL | 1.6449 mL | 4.1123 mL | |
| 20 mM | 0.1234 mL | 0.6168 mL | 1.2337 mL | 3.0842 mL | |
| 25 mM | 0.0987 mL | 0.4935 mL | 0.9869 mL | 2.4674 mL | |
| 30 mM | 0.0822 mL | 0.4112 mL | 0.8225 mL | 2.0561 mL | |
| 40 mM | 0.0617 mL | 0.3084 mL | 0.6168 mL | 1.5421 mL | |
| 50 mM | 0.0493 mL | 0.2467 mL | 0.4935 mL | 1.2337 mL | |
| 60 mM | 0.0411 mL | 0.2056 mL | 0.4112 mL | 1.0281 mL |
NVP-ACC789 Related Classifications
HY-19624 Related Classifications
Powered by Bioz