sEH inhibitor-17
Based on 1 Customer Validation
sEH inhibitor-17 (compound 4f) is an oral active soluble epoxide hydrolase (sEH) inhibitor with the IC50 of 2.94 nM. sEH inhibitor-17 shows anti-inflammatory efficacy.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.48%
- CAS No.: 2823295-37-8
- Formule: C18H21F3N2O4S
- Masse moléculaire:418.43
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Activité biologique
Description
Chemical Information
-
CAS No. 2823295-37-8
-
Appearance Powder
-
Masse moléculaire 418.43
-
Formule C18H21F3N2O4S
-
SMILES
O=C(NS(=O)(C1=CC=C(C=C1)OC(F)(F)F)=O)NC23C[C@H](C4)C[C@H](C[C@H]4C3)C2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (119.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.97 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3899 mL | 11.9494 mL | 23.8989 mL | 59.7472 mL |
| 5 mM | 0.4780 mL | 2.3899 mL | 4.7798 mL | 11.9494 mL | |
| 10 mM | 0.2390 mL | 1.1949 mL | 2.3899 mL | 5.9747 mL | |
| 15 mM | 0.1593 mL | 0.7966 mL | 1.5933 mL | 3.9831 mL | |
| 20 mM | 0.1195 mL | 0.5975 mL | 1.1949 mL | 2.9874 mL | |
| 25 mM | 0.0956 mL | 0.4780 mL | 0.9560 mL | 2.3899 mL | |
| 30 mM | 0.0797 mL | 0.3983 mL | 0.7966 mL | 1.9916 mL | |
| 40 mM | 0.0597 mL | 0.2987 mL | 0.5975 mL | 1.4937 mL | |
| 50 mM | 0.0478 mL | 0.2390 mL | 0.4780 mL | 1.1949 mL | |
| 60 mM | 0.0398 mL | 0.1992 mL | 0.3983 mL | 0.9958 mL | |
| 80 mM | 0.0299 mL | 0.1494 mL | 0.2987 mL | 0.7468 mL | |
| 100 mM | 0.0239 mL | 0.1195 mL | 0.2390 mL | 0.5975 mL |