Ibrolipim
Based on 1 Customer Validation
Ibrolipim (NO-1886) is an orally active lipoprotein lipase (LPL)-promoting agent. Ibrolipim decreases plasma triglycerides, increases high-density lipoprotein cholesterol levels. Ibrolipim has renoprotective and hypolipidemic effects.
For research use only. We do not sell to patients.
- Purity: 99.48%
- CAS No.: 133208-93-2
- Formula: C19H20BrN2O4P
- Molecular Weight:451.25
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Ibrolipim (0.5-10 μM; 0-24 hours; THP-1 macrophage-derived foam cells) treatment increases ABCA1 and ABCG1 expression at translational levels in a dose-dependent and time-dependent manner [1].
Ibrolipim (0.5-10 μM; 0-24 hours; THP-1 macrophage-derived foam cells) treatment increases ABCA1 and ABCG1 expression at the transcriptional levels in a dose-dependent and time-dependent manner [1].
Ibrolipim 5 and 50 μmol/L significantly increases cholesterol efflux from THP-1 macrophage-derived foam cells to apoA-I or HDL. LXRα is also upregulated by the Ibrolipim treatment. LXRα small interfering RNA completely abolishes the promotion effect that is induced by Ibrolipim[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:THP-1 macrophage-derived foam cells
-
Concentration:0.5 μM, 5 μM, 10 μM
-
Incubation Time:0 hour, 6 hours, 12 hours, 24 hours
-
Result:Increased ABCA1 and ABCG1 translational levels in a dose-dependent and time-dependent manner.
-
Cell Line:THP-1 macrophage-derived foam cells
-
Concentration:0.5 μM, 5 μM, 10 μM
-
Incubation Time:0 hour, 6 hours, 12 hours, 24 hours
-
Result:Increased ABCA1 and ABCG1 expression at the transcriptional levels in a dose-dependent and time-dependent manner.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female Sprague-Dawley rats (10-week-old; 200-260 g) with experimental ovariectomy treatment[2]
-
Dosage:100 mg/kg
-
Administration:Oral administration; daily; for 8 weeks
-
Result:Decreased accumulation of visceral fat and suppressed the increase in body weight resulting from the ovariectomy.
Chemical Information
-
CAS No. 133208-93-2
-
Appearance Solid
-
Molecular Weight 451.25
-
Formula C19H20BrN2O4P
-
Color White to yellow
-
SMILES
BrC1=CC(C#N)=C(C=C1)NC(C2=CC=C(C=C2)CP(OCC)(OCC)=O)=O
-
Synonyms
NO-1886
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (110.80 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (420 KB)
- English - EN (420 KB)
- Français - FR (420 KB)
- Deutsch - DE (420 KB)
- Norwegian - NO (420 KB)
- Español - ES (420 KB)
- Swedish - SV (420 KB)
- Italian - IT (420 KB)
- Korean - KR (420 KB)
- Portuguese - PT (420 KB)
-
Handling Instructions (2659 KB)
References
[1]. Chen SG, et al. Ibrolipim increases ABCA1/G1 expression by the LXRα signaling pathway in THP-1 macrophage-derived foam cells. Acta Pharmacol Sin. 2010 Oct;31(10):1343-9. [Content Brief]
[2]. Kano S, et al. NO-1886 (ibrolipim), a lipoprotein lipase-promoting agent, accelerates the expression of UCP3 messenger RNA and ameliorates obesity in ovariectomized rats. Metabolism. 2006 Feb;55(2):151-8. [Content Brief]
[3]. Liu Y, et al. Preventive effect of Ibrolipim on suppressing lipid accumulation and increasing lipoprotein lipase in the kidneys of diet-induced diabetic minipigs. Lipids Health Dis. 2011 Jul 16;10:117. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2161 mL | 11.0803 mL | 22.1607 mL | 55.4017 mL |
| 5 mM | 0.4432 mL | 2.2161 mL | 4.4321 mL | 11.0803 mL | |
| 10 mM | 0.2216 mL | 1.1080 mL | 2.2161 mL | 5.5402 mL | |
| 15 mM | 0.1477 mL | 0.7387 mL | 1.4774 mL | 3.6934 mL | |
| 20 mM | 0.1108 mL | 0.5540 mL | 1.1080 mL | 2.7701 mL | |
| 25 mM | 0.0886 mL | 0.4432 mL | 0.8864 mL | 2.2161 mL | |
| 30 mM | 0.0739 mL | 0.3693 mL | 0.7387 mL | 1.8467 mL | |
| 40 mM | 0.0554 mL | 0.2770 mL | 0.5540 mL | 1.3850 mL | |
| 50 mM | 0.0443 mL | 0.2216 mL | 0.4432 mL | 1.1080 mL | |
| 60 mM | 0.0369 mL | 0.1847 mL | 0.3693 mL | 0.9234 mL | |
| 80 mM | 0.0277 mL | 0.1385 mL | 0.2770 mL | 0.6925 mL | |
| 100 mM | 0.0222 mL | 0.1108 mL | 0.2216 mL | 0.5540 mL |