VEGFR2-IN-2
Based on 1 Customer Validation
VEGFR2-IN-2 (compound 6e) is a potent and selective VEGFR2 inhibitor with an IC50 of 19.32 nM. VEGFR2-IN-2 can be used for researching
For research use only. We do not sell to patients.
- Purity: 99.26%
- CAS No.: 737818-56-3
- Formula: C15H11BrN2O
- Molecular Weight:315.16
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
All VEGFR Isoforms
More
Biological Activity
|
VEGFR2 19.32 nM (IC50) |
Chemical Information
-
CAS No. 737818-56-3
-
Appearance Solid
-
Molecular Weight 315.16
-
Formula C15H11BrN2O
-
Color White to off-white
-
SMILES
BrC1=CC=C(COC2=C3C=CC=CC3=NC=N2)C=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (317.30 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.93 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1730 mL | 15.8650 mL | 31.7299 mL | 79.3248 mL |
| 5 mM | 0.6346 mL | 3.1730 mL | 6.3460 mL | 15.8650 mL | |
| 10 mM | 0.3173 mL | 1.5865 mL | 3.1730 mL | 7.9325 mL | |
| 15 mM | 0.2115 mL | 1.0577 mL | 2.1153 mL | 5.2883 mL | |
| 20 mM | 0.1586 mL | 0.7932 mL | 1.5865 mL | 3.9662 mL | |
| 25 mM | 0.1269 mL | 0.6346 mL | 1.2692 mL | 3.1730 mL | |
| 30 mM | 0.1058 mL | 0.5288 mL | 1.0577 mL | 2.6442 mL | |
| 40 mM | 0.0793 mL | 0.3966 mL | 0.7932 mL | 1.9831 mL | |
| 50 mM | 0.0635 mL | 0.3173 mL | 0.6346 mL | 1.5865 mL | |
| 60 mM | 0.0529 mL | 0.2644 mL | 0.5288 mL | 1.3221 mL | |
| 80 mM | 0.0397 mL | 0.1983 mL | 0.3966 mL | 0.9916 mL | |
| 100 mM | 0.0317 mL | 0.1586 mL | 0.3173 mL | 0.7932 mL |