JH-X-119-01 hydrochloride
Based on 6 publication(s) in Google Scholar
JH-X-119-01 hydrochloride is a potent and selective interleukin-1 receptor-associated kinases 1 (IRAK1) inhibitor. JH-X-119-01 hydrochloride ameliorates LPS-induced sepsis in mice.
For research use only. We do not sell to patients.
- Purity: 99.14%
- CAS No.: 2591344-30-6
- Formula: C25H21ClN6O3
- Molecular Weight:488.93
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) JH-X-119-01 hydrochloride
More
Biological Activity
|
IRAK1 |
Jh-X-119-01 (10 μM) decreases phosphorylation of NF-κB and mRNA levels of IL-6 and TNFα in LPS-treated macrophages in vitro. Jh-X-119-01 selectively inhibits IRAK1 phosphorylation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:RAW 264.7 cells and THP-1 cells
-
Concentration:10 μM
-
Incubation Time:15 minutes
-
Result:Decreased LPS (100 ng/mL)-induced phosphorylation of IκBα and NF-κB-P65.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 (20-22 g, male) mice[1]
-
Dosage:5 mg/kg and 10 mg/kg
-
Administration:Intraperitoneally injected; 5 days
-
Result:Protected mice from LPS (20 mg/kg)-induced sepsis. Survival at day 5 was 13.3% in control group where septic mice were treated by vehicle, while the values were 37.5% and 56.3% for 5 mg/kg and 10 mg/kg.
Chemical Information
-
CAS No. 2591344-30-6
-
Appearance Solid
-
Molecular Weight 488.93
-
Formula C25H21ClN6O3
-
Color Light yellow to yellow
-
SMILES
O=C(C=C)NC1=CC=CC(C(NC2=CC=C(NC(C3=NC(C4=CC=NN4)=CC=C3)=O)C=C2)=O)=C1.Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Sci Adv
2024 Nov 29;10(48):eadq8122. PMID: 39602545 -
Emerg Microbes Infect
Capsid Protein Mediated Evasion of IRAK1-Dependent Signaling is Essential to Sindbis Virus Neuroinvasion and Virulence in Mice. [Abstract]2024 Dec;13(1):2300452. PMID: 38164715 -
JCI Insight
2022 Jul 8;7(13):e149825. PMID: 35801586 -
-
-
Solvent & Solubility
DMSO : 100 mg/mL (204.53 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0453 mL | 10.2264 mL | 20.4528 mL | 51.1321 mL |
| 5 mM | 0.4091 mL | 2.0453 mL | 4.0906 mL | 10.2264 mL | |
| 10 mM | 0.2045 mL | 1.0226 mL | 2.0453 mL | 5.1132 mL | |
| 15 mM | 0.1364 mL | 0.6818 mL | 1.3635 mL | 3.4088 mL | |
| 20 mM | 0.1023 mL | 0.5113 mL | 1.0226 mL | 2.5566 mL | |
| 25 mM | 0.0818 mL | 0.4091 mL | 0.8181 mL | 2.0453 mL | |
| 30 mM | 0.0682 mL | 0.3409 mL | 0.6818 mL | 1.7044 mL | |
| 40 mM | 0.0511 mL | 0.2557 mL | 0.5113 mL | 1.2783 mL | |
| 50 mM | 0.0409 mL | 0.2045 mL | 0.4091 mL | 1.0226 mL | |
| 60 mM | 0.0341 mL | 0.1704 mL | 0.3409 mL | 0.8522 mL | |
| 80 mM | 0.0256 mL | 0.1278 mL | 0.2557 mL | 0.6392 mL | |
| 100 mM | 0.0205 mL | 0.1023 mL | 0.2045 mL | 0.5113 mL |