CP-20961
Based on 1 Customer Validation
CP-20961 is an interferon inducer. CP-20961 is a potent synthetic non-immunogenic adjuvant that induces arthritis.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.34%
- CAS. Nr.: 35607-20-6
- Formel: C43H90N2O2
- Molecular Weight:667.19
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
-
Animal Model:Female, Hartley-derived guinea pigs, weighing 350 to 400 g[3].
-
Dosage:10 mg/kg.
-
Administration:IV once either 24, 48, or 72 hours post-burn.
-
Result:Had no effect on survival after challenge with P. aeruginosa 96 hours post-burn.
Please do not refer to only one article to determine the experimental conditions. It is recommended to determine the optimal experimental conditions (animal strain, age, dosage, frequency and cycle, detection time and indicators, etc.) through preliminary experiments before the formal experiment.
Administration: 50 mg/mL (0.2 mL) • subplantar injection • every other day for 16 days
Administration: 10 mg/kg • ip • 7, 3 or 1 days before challenge with ip L. monocxtogenes
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 35607-20-6
-
Appearance Solid
-
Molecular Weight 667.19
-
Formel C43H90N2O2
-
Color Off-white to light yellow
-
SMILES
OCCN(CCO)CCCN(CCCCCCCCCCCCCCCCCC)CCCCCCCCCCCCCCCCCC
-
Synonyms
Avridine
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 10 mg/mL (14.99 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 1 mg/mL (1.50 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 1 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 1 mg/mL (1.50 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 1 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Chang YH, et al. Adjuvant polyarthritis. IV. Induction by a synthetic adjuvant: immunologic, histopathologic, and other studies. Arthritis Rheum. 1980 Jan;23(1):62-71. [Content Brief]
[2]. Wing EJ, et al. Dissociative effects of a novel immunomodulating agent (CP-20, 961) on host defenses of mice. J Immunopharmacol. 1984;6(4):339-58. [Content Brief]
[3]. Waldman RH, et al. Effect of CP-20,961, an interferon inducer, on upper respiratory tract infections due to rhinovirus type 21 in volunteers. J Infect Dis. 1978;138(4):531-535. [Content Brief]
[4]. Brun JG, et al. Effects of calprotectin in avridine-induced arthritis. APMIS. 1995 Mar;103(3):233-40. [Content Brief]
[5]. Vingsbo C, et al. Avridine-induced arthritis in rats; a T cell-dependent chronic disease influenced both by MHC genes and by non-MHC genes. Clin Exp Immunol. 1995 Mar;99(3):359-63. [Content Brief]
[6]. Stinnett JD, et al. Synthetic immunomodulators for prevention of fatal infections in a burned guinea pig model. Ann Surg. 1983 Jul;198(1):53-7. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4988 mL | 7.4941 mL | 14.9882 mL | 37.4706 mL |
| 5 mM | 0.2998 mL | 1.4988 mL | 2.9976 mL | 7.4941 mL | |
| 10 mM | 0.1499 mL | 0.7494 mL | 1.4988 mL | 3.7471 mL |
CP-20961 Related Classifications
HY-107634 Related Classifications
Powered by Bioz