GPR55 agonist 4
Based on 1 Customer Validation
GPR55 agonist 4 (Compound 28) is a GPR55 agonist (EC50: 131 nM, and 1.41 nM for hGPR55 and rGPR55). GPR55 agonist 4 induces β-arrestin recruitment to human GPR55.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.36%
- CAS. Nr.: 3006105-55-8
- Formel: C19H16FN5O2
- Molecular Weight:365.36
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
Chemical Information
-
CAS. Nr. 3006105-55-8
-
Appearance Solid
-
Molecular Weight 365.36
-
Formel C19H16FN5O2
-
Color Light yellow to yellow
-
SMILES
O=C1OC2=CC=C(C3=CN=C(N[C@@H](C4=CC=C(F)C=C4)C)N=N3)C=C2N1C
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (273.70 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (13.69 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (269 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7370 mL | 13.6851 mL | 27.3703 mL | 68.4257 mL |
| 5 mM | 0.5474 mL | 2.7370 mL | 5.4741 mL | 13.6851 mL | |
| 10 mM | 0.2737 mL | 1.3685 mL | 2.7370 mL | 6.8426 mL | |
| 15 mM | 0.1825 mL | 0.9123 mL | 1.8247 mL | 4.5617 mL | |
| 20 mM | 0.1369 mL | 0.6843 mL | 1.3685 mL | 3.4213 mL | |
| 25 mM | 0.1095 mL | 0.5474 mL | 1.0948 mL | 2.7370 mL | |
| 30 mM | 0.0912 mL | 0.4562 mL | 0.9123 mL | 2.2809 mL | |
| 40 mM | 0.0684 mL | 0.3421 mL | 0.6843 mL | 1.7106 mL | |
| 50 mM | 0.0547 mL | 0.2737 mL | 0.5474 mL | 1.3685 mL | |
| 60 mM | 0.0456 mL | 0.2281 mL | 0.4562 mL | 1.1404 mL | |
| 80 mM | 0.0342 mL | 0.1711 mL | 0.3421 mL | 0.8553 mL | |
| 100 mM | 0.0274 mL | 0.1369 mL | 0.2737 mL | 0.6843 mL |