Ac-Gly-BoroPro
Based on 5 publication(s) in Google Scholar
Ac-Gly-BoroPro is a selective FAP inhibitor with a Ki of 23 nM.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.0%
- No. CAS: 886992-99-0
- Fòrmula: C8H15BN2O4
- Peso molecular:214.03
-
Almacenamiento:
-20°C, protect from light, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Ac-Gly-BoroPro
More
Actividad biológica
Ki: 23 nM (FAP)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| U-87MG ATCC | IC50 |
0.663 μM
Compound: Ac-Gly-BoroPro
|
Inhibition of FAP in human U87MG cells using Suc-Gly-Pro-AMC as substrate by fluorescence based assay
Inhibition of FAP in human U87MG cells using Suc-Gly-Pro-AMC as substrate by fluorescence based assay
|
[PMID: 32527554] |
FAP has been implicated in cancer; however, its specific role remains elusive because inhibitors that distinguish FAP from other prolyl peptidases like dipeptidyl peptidase-4 (DPP-4) have not been developed. Ac-Gly-BoroPro selectively inhibits FAP relative to other prolyl peptidases. FAP reacts readily with submicromolar concentrations of Ac-Gly-BoroPro, reaching steady state inhibition levels rapidly (Ki=23±3 nM). In contrast, DPP-4 requires higher Ac-Gly-BoroPro concentrations for inhibition and a longer time to reach steady state inhibition levels (Ki=377±18 nM). Ac-Gly-BoroPro inhibits other prolyl peptidases (DPP-7, DPP-8, DPP-9, prolyl oligopeptidase, and acylpeptide hydrolase) with Ki values ranging from 9- to 5400-fold higher than that for FAP inhibition. The N-acyl-linkage in Ac-Gly-BoroPro blocks the N terminus of the inhibitor, making it less nucleophilic and therefore unlikely to cyclize[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 886992-99-0
-
Appearance Solid
-
Peso molecular 214.03
-
Fòrmula C8H15BN2O4
-
Color White to off-white
-
SMILES
O=C(N1[C@@H](B(O)O)CCC1)CNC(C)=O
-
Sequence Shortening
Ac-G-{boroP}
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, protect from light, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Bone Res
Inhibition of fibroblast activation protein ameliorates cartilage matrix degradation and osteoarthritis progression. [Abstract]2023 Jan 2;11(1):3. PMID: 36588124 -
Cell Rep
Identification of Fibroblast Activation Protein as an Osteogenic Suppressor and Anti-osteoporosis Drug Target. [Abstract]2020 Oct 13;33(2):108252. PMID: 33053358 -
J Dermatol Sci
2024 Feb;113(2):51-61. PMID: 38155020 -
Exp Cell Res
Enzymatic activity of fibroblast activation protein-α is essential for TGF-β1-induced fibroblastic differentiation of human periodontal ligament cells. [Abstract]2024 Aug 31:114230. PMID: 39222867 -
Biol Reprod
Collagen turnover during cervical remodeling involves both intracellular and extracellular collagen degradation pathways. [Abstract]2025 Jan 17:ioaf012. PMID: 39823285
Solvente y solubilidad
DMSO : ≥ 50 mg/mL (233.61 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (11.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (11.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: ≥ 100 mg/mL (467.22 mM); Clear solution
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Ki values for inhibition of proteases by Ac-Gly-BoroPro are determined using the method of progress curves for analysis of tight binding competitive inhibitors. Various concentrations of Ac-Gly-BoroPro are reacted with FAP (1.0 nM) and DPP-4 (0.1 nM) in the presence of Ala-Pro-AFC (500 μM for FAP; 100 μM for DPP-4), and time-dependent inhibition of each protease is monitored. Reactions contained inhibitor concentrations at least 20-fold greater than protease concentrations, such that the protease-inhibitor complex does not significantly deplete the free inhibitor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.6722 mL | 23.3612 mL | 46.7224 mL | 116.8061 mL |
| 5 mM | 0.9344 mL | 4.6722 mL | 9.3445 mL | 23.3612 mL | |
| 10 mM | 0.4672 mL | 2.3361 mL | 4.6722 mL | 11.6806 mL | |
| 15 mM | 0.3115 mL | 1.5574 mL | 3.1148 mL | 7.7871 mL | |
| 20 mM | 0.2336 mL | 1.1681 mL | 2.3361 mL | 5.8403 mL | |
| 25 mM | 0.1869 mL | 0.9344 mL | 1.8689 mL | 4.6722 mL | |
| 30 mM | 0.1557 mL | 0.7787 mL | 1.5574 mL | 3.8935 mL | |
| 40 mM | 0.1168 mL | 0.5840 mL | 1.1681 mL | 2.9202 mL | |
| 50 mM | 0.0934 mL | 0.4672 mL | 0.9344 mL | 2.3361 mL | |
| 60 mM | 0.0779 mL | 0.3894 mL | 0.7787 mL | 1.9468 mL | |
| 80 mM | 0.0584 mL | 0.2920 mL | 0.5840 mL | 1.4601 mL | |
| 100 mM | 0.0467 mL | 0.2336 mL | 0.4672 mL | 1.1681 mL |
Powered by Bioz