Dydrogesterone
Based on 2 publication(s) in Google Scholar
Dydrogesterone is a potent, orally active progestogen indicated in a wide variety of gynaecological conditions related to progesterone deficiency.
For research use only. We do not sell to patients.
- Purity: 99.88%
- CAS No.: 152-62-5
- Formula: C21H28O2
- Molecular Weight:312.45
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
FDA-Approved Drug Library
HY-L022
-
Drug Repurposing Compound Library
HY-L035
-
Endocrinology Compound Library
HY-L047
-
NMPA-Approved Drug Library
HY-L053
-
Orally Active Compound Library
HY-L061
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Rare Diseases Drug Library
HY-L102
-
Human Metabolite Library
HY-L123
-
Nuclear Receptor Compound Library
HY-L126
-
Withdrawn Drug Compound Library
HY-L140
-
Off-patent Drug Library
HY-L141
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Human Hormone Compound Library
HY-L211
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Steroid Hormones Library
HY-L239
Publications Citing Use of MedChemExpress (MCE) Dydrogesterone
More
Biological Activity
Progesterone Receptor[1].
Dydrogesterone is a potent, orally active progestogen indicated in a wide variety of gynaecological conditions related to progesterone deficiency. Although similar in molecular structure and pharmacological effects to endogenous progesterone. It is orally active at far lower doses. Its freedom from estrogenic, androgenic, anabolic, corticoid and other undesirable hormonal effects gives it additional benefits over most other synthetic progestogens.Dydrogesterone has also been registered as hormone replacement therapy (HRT) to counteract the negative effects of unopposed estrogen on the endometrium in women with an intact uterus. Dydrogesterone is relatively safe and well tolerated, and does not exhibit the androgenic side effects that are common with some other progestins, like medroxyprogesterone[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 152-62-5
-
Appearance Solid
-
Molecular Weight 312.45
-
Formula C21H28O2
-
Color White to light yellow
-
SMILES
CC([C@H]1CC[C@@]2([H])[C@]3([H])C=CC4=CC(CC[C@@]4(C)[C@]3([H])CC[C@]12C)=O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
Proteogenomic Landscape of Breast Ductal Carcinoma Reveals Tumor Progression Characteristics and Therapeutic Targets. [Abstract]2024 Dec;11(46):e2401041. PMID: 39418072 -
Cells
Assessment of FDA-Approved Drugs as a Therapeutic Approach for Niemann-Pick Disease Type C1 Using Patient-Specific iPSC-Based Model Systems. [Abstract]2022 Jan 18;11(3):319. PMID: 35159129
Solvent & Solubility
DMSO : 33.33 mg/mL (106.67 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2005 mL | 16.0026 mL | 32.0051 mL | 80.0128 mL |
| 5 mM | 0.6401 mL | 3.2005 mL | 6.4010 mL | 16.0026 mL | |
| 10 mM | 0.3201 mL | 1.6003 mL | 3.2005 mL | 8.0013 mL | |
| 15 mM | 0.2134 mL | 1.0668 mL | 2.1337 mL | 5.3342 mL | |
| 20 mM | 0.1600 mL | 0.8001 mL | 1.6003 mL | 4.0006 mL | |
| 25 mM | 0.1280 mL | 0.6401 mL | 1.2802 mL | 3.2005 mL | |
| 30 mM | 0.1067 mL | 0.5334 mL | 1.0668 mL | 2.6671 mL | |
| 40 mM | 0.0800 mL | 0.4001 mL | 0.8001 mL | 2.0003 mL | |
| 50 mM | 0.0640 mL | 0.3201 mL | 0.6401 mL | 1.6003 mL | |
| 60 mM | 0.0533 mL | 0.2667 mL | 0.5334 mL | 1.3335 mL | |
| 80 mM | 0.0400 mL | 0.2000 mL | 0.4001 mL | 1.0002 mL | |
| 100 mM | 0.0320 mL | 0.1600 mL | 0.3201 mL | 0.8001 mL |
Dydrogesterone Related Classifications
HY-B0257A Related Classifications
Powered by Bioz