S516
Based on 1 Customer Validation
S516 (Compound 22) is an active metabolite of CKD-516 and a potent tubulin polymerization inhibitor with an IC50 of 4.29 μM. S516 has marked antitumor activity.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.03%
- CAS No.: 1016543-77-3
- 화학식: C21H19N5O4S
- 분자량:437.47
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
IC50: 4.29 μM (tubulin polymerization)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HCT-116 | IC50 |
42.8 nM
Compound: 22
|
Cytotoxicity against human HCT116 cells after 72 hrs by MTT assay
Cytotoxicity against human HCT116 cells after 72 hrs by MTT assay
|
[PMID: 20690624] |
| HCT-15 | IC50 |
24.9 nM
Compound: 22
|
Cytotoxicity against human HCT15 cells after 72 hrs by MTT assay
Cytotoxicity against human HCT15 cells after 72 hrs by MTT assay
|
[PMID: 20690624] |
| HCT-15 | IC50 |
4.29 μM
Compound: 22
|
Inhibition of tubulin polymerization in multidrug-resistant human HCT15 cells after 1 hr
Inhibition of tubulin polymerization in multidrug-resistant human HCT15 cells after 1 hr
|
[PMID: 20690624] |
| HL-60 | IC50 |
0.0048 μM
Compound: 1
|
Antiproliferative activity against human HL60 cells after 72 hrs by MTT assay
Antiproliferative activity against human HL60 cells after 72 hrs by MTT assay
|
[PMID: 20850313] |
| HL-60 | IC50 |
4.8 nM
Compound: 22
|
Cytotoxicity against human HL60 cells after 72 hrs by MTT assay
Cytotoxicity against human HL60 cells after 72 hrs by MTT assay
|
[PMID: 20690624] |
| MDA-MB-231 | IC50 |
9.8 nM
Compound: 1
|
Antiproliferative activity against P-gp expressing multidrug-resistant human MDA-MB-231 cells after 72 hrs by MTT assay
Antiproliferative activity against P-gp expressing multidrug-resistant human MDA-MB-231 cells after 72 hrs by MTT assay
|
[PMID: 20850313] |
S516 has potent cytotoxicity with IC50s of 4.8 nM, 42.8 nM and 24.9 nM for HL-60, HCT116 and HCT15 cells, respectively[1].
S516 (Compound 22; 30 nM; 16 hours; HL60 cells) treatmemt causes significant arrest of cells at the G2/M phase, resulting in apoptosis with concomitant loss of G0/G1 phase[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HL60 cells
-
Concentration:30 nM
-
Incubation Time:16 hours
-
Result:Caused significant arrest of cells at the G2/M phase, resulting in apoptosis with concomitant loss of G0/G1 phase.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mice bearing 3LL lung cancer[1]
-
Dosage:5 mg/kg, 10 mg/kg
-
Administration:Intraperitoneal injection
-
Result:Had promising antitumor activity (inhibition ratio (IR)> 63%).
Chemical Information
-
CAS No. 1016543-77-3
-
Appearance Solid
-
분자량 437.47
-
화학식 C21H19N5O4S
-
Color Light yellow to yellow
-
SMILES
O=C(C1=CC=C(C2=CSC(N)=N2)C=C1N3N=CN=C3)C4=CC(OC)=C(OC)C(OC)=C4
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 12.5 mg/mL (28.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.86 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2859 mL | 11.4294 mL | 22.8587 mL | 57.1468 mL |
| 5 mM | 0.4572 mL | 2.2859 mL | 4.5717 mL | 11.4294 mL | |
| 10 mM | 0.2286 mL | 1.1429 mL | 2.2859 mL | 5.7147 mL | |
| 15 mM | 0.1524 mL | 0.7620 mL | 1.5239 mL | 3.8098 mL | |
| 20 mM | 0.1143 mL | 0.5715 mL | 1.1429 mL | 2.8573 mL | |
| 25 mM | 0.0914 mL | 0.4572 mL | 0.9143 mL | 2.2859 mL |