NH2-C4-NH-Boc
Based on 1 Customer Validation
NH2-C4-NH-Boc (compound 15) is a PROTAC linker, which refers to the Alkyl/ether composition. NH2-C4-NH-Boc can be used in the synthesis of a series of PROTACs. PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins.
For research use only. We do not sell to patients.
- Purity: 99.97%
- CAS No.: 68076-36-8
- Formula: C9H20N2O2
- Molecular Weight:188.27
-
Storage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
HY-W008296
NH2-C6-NH-Boc
-
HY-40171
NH2-C2-NH-Boc
-
HY-40172
tert-Butyl (3-aminopropyl)carbamate
-
HY-W105718
6-Mercapto-1-hexanol
-
HY-W007423
3-Ethynylaniline
-
HY-76667
3-(Boc-amino)propyl bromide
-
HY-W004710
NH2-C5-NH-Boc
-
HY-W011895
tert-Butyl (6-aminohexyl)carbamate hydrochloride
-
HY-W008474
Boc-NH-PEG2-C2-NH2
-
HY-W004660
4-Ethynylaniline
-
HY-W129178
Benzyl (5-aminopentyl)carbamate hydrochloride
All PROTAC Linkers Isoforms
More
Biological Activity
|
Alkyl/ether |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RAW264.7 | IC50 |
>100 μM
Compound: 2b
|
Antikinetoplastid activity against Leishmania donovani LV9 axenic amastigotes in mouse RAW264.7 cells assessed as viability measured 24 hrs by SYBR green assay
Antikinetoplastid activity against Leishmania donovani LV9 axenic amastigotes in mouse RAW264.7 cells assessed as viability measured 24 hrs by SYBR green assay
|
[PMID: 25499437] |
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 68076-36-8
-
Appearance Liquid (Density: 0.984 g/cm3 )
-
Molecular Weight 188.27
-
Formula C9H20N2O2
-
Color Colorless to light yellow
-
SMILES
NCCCCNC(OC(C)(C)C)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
H2O : 100 mg/mL (531.15 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (13.28 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (531.15 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (268 KB)
-
SDS (476 KB)
- English - EN (476 KB)
- Français - FR (476 KB)
- Deutsch - DE (476 KB)
- Norwegian - NO (476 KB)
- Español - ES (476 KB)
- Swedish - SV (476 KB)
- Italian - IT (476 KB)
- Korean - KR (476 KB)
- Portuguese - PT (476 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 5.3115 mL | 26.5576 mL | 53.1152 mL | 132.7880 mL |
| 5 mM | 1.0623 mL | 5.3115 mL | 10.6230 mL | 26.5576 mL | |
| 10 mM | 0.5312 mL | 2.6558 mL | 5.3115 mL | 13.2788 mL | |
| 15 mM | 0.3541 mL | 1.7705 mL | 3.5410 mL | 8.8525 mL | |
| 20 mM | 0.2656 mL | 1.3279 mL | 2.6558 mL | 6.6394 mL | |
| 25 mM | 0.2125 mL | 1.0623 mL | 2.1246 mL | 5.3115 mL | |
| 30 mM | 0.1771 mL | 0.8853 mL | 1.7705 mL | 4.4263 mL | |
| 40 mM | 0.1328 mL | 0.6639 mL | 1.3279 mL | 3.3197 mL | |
| 50 mM | 0.1062 mL | 0.5312 mL | 1.0623 mL | 2.6558 mL | |
| 60 mM | 0.0885 mL | 0.4426 mL | 0.8853 mL | 2.2131 mL | |
| 80 mM | 0.0664 mL | 0.3320 mL | 0.6639 mL | 1.6599 mL | |
| 100 mM | 0.0531 mL | 0.2656 mL | 0.5312 mL | 1.3279 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
NH2-C4-NH-Boc Related Classifications
HY-40178 Related Classifications
Powered by Bioz