p-Menthane-3,8-diol
Based on 1 Customer Validation
p-Menthane-3,8-diol is a mosquito repellent derived from hydrated cyclized lemon eucalyptus oil. p-Menthane-3,8-diol exerts repellent effects by preventing laboratory-reared Aedes aegypti from landing/probing and biting on exposed skin. p-Menthane-3,8-diol can be used to repel Aedes aegypti.
For research use only. We do not sell to patients.
- Purity: 95.31%
- CAS No.: 42822-86-6
- Formula: C10H20O2
- Molecular Weight:172.27
-
Storage:
Store at room temperature 3 years.
In solvent -80°C, 2 years , -20°C, 1 year
Biological Activity
Description
In Vitro
There is a logarithmic relationship between the application dose of p-Menthane-3,8-diol and the complete protection time against Aedes aegypti[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 42822-86-6
-
Appearance Solid
-
Molecular Weight 172.27
-
Formula C10H20O2
-
SMILES
OC1CC(C)CCC1C(O)(C)C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Store at room temperature 3 years
In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (580.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (14.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (14.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.8048 mL | 29.0242 mL | 58.0484 mL | 145.1210 mL |
| 5 mM | 1.1610 mL | 5.8048 mL | 11.6097 mL | 29.0242 mL | |
| 10 mM | 0.5805 mL | 2.9024 mL | 5.8048 mL | 14.5121 mL | |
| 15 mM | 0.3870 mL | 1.9349 mL | 3.8699 mL | 9.6747 mL | |
| 20 mM | 0.2902 mL | 1.4512 mL | 2.9024 mL | 7.2561 mL | |
| 25 mM | 0.2322 mL | 1.1610 mL | 2.3219 mL | 5.8048 mL | |
| 30 mM | 0.1935 mL | 0.9675 mL | 1.9349 mL | 4.8374 mL | |
| 40 mM | 0.1451 mL | 0.7256 mL | 1.4512 mL | 3.6280 mL | |
| 50 mM | 0.1161 mL | 0.5805 mL | 1.1610 mL | 2.9024 mL | |
| 60 mM | 0.0967 mL | 0.4837 mL | 0.9675 mL | 2.4187 mL | |
| 80 mM | 0.0726 mL | 0.3628 mL | 0.7256 mL | 1.8140 mL | |
| 100 mM | 0.0580 mL | 0.2902 mL | 0.5805 mL | 1.4512 mL |