Tetrabutylammonium iodide
Based on 1 Customer Validation
Tetra-n-butylammonium iodide is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: ≥99.9%
- CAS No.: 311-28-4
- Formule: C16H36IN
- Masse moléculaire:369.37
-
Stockage:
RT, sealed storage, away from moisture and light.
In solvent -80°C, 1 year , -20°C, 6 months
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
-
Help & FAQs
Activité biologique
Chemical Information
-
CAS No. 311-28-4
-
Appearance Solid
-
Masse moléculaire 369.37
-
Formule C16H36IN
-
Color White to off-white
-
SMILES
CCCC[N+](CCCC)(CCCC)CCCC.[I-]
-
Synonyms
Tetra-n-butylammonium iodide; TBAI
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
RT, sealed storage, away from moisture and light
In solvent -80°C 1 year -20°C 6 months
Solvant et solubilité
DMSO : 100 mg/mL (270.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.77 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (240 KB)
-
SDS (555 KB)
- English - EN (555 KB)
- Français - FR (555 KB)
- Deutsch - DE (555 KB)
- Norwegian - NO (555 KB)
- Español - ES (555 KB)
- Swedish - SV (555 KB)
- Italian - IT (555 KB)
- Korean - KR (555 KB)
- Portuguese - PT (555 KB)
-
Instruction de manipulation (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7073 mL | 13.5366 mL | 27.0731 mL | 67.6828 mL |
| 5 mM | 0.5415 mL | 2.7073 mL | 5.4146 mL | 13.5366 mL | |
| 10 mM | 0.2707 mL | 1.3537 mL | 2.7073 mL | 6.7683 mL | |
| 15 mM | 0.1805 mL | 0.9024 mL | 1.8049 mL | 4.5122 mL | |
| 20 mM | 0.1354 mL | 0.6768 mL | 1.3537 mL | 3.3841 mL | |
| 25 mM | 0.1083 mL | 0.5415 mL | 1.0829 mL | 2.7073 mL | |
| 30 mM | 0.0902 mL | 0.4512 mL | 0.9024 mL | 2.2561 mL | |
| 40 mM | 0.0677 mL | 0.3384 mL | 0.6768 mL | 1.6921 mL | |
| 50 mM | 0.0541 mL | 0.2707 mL | 0.5415 mL | 1.3537 mL | |
| 60 mM | 0.0451 mL | 0.2256 mL | 0.4512 mL | 1.1280 mL | |
| 80 mM | 0.0338 mL | 0.1692 mL | 0.3384 mL | 0.8460 mL | |
| 100 mM | 0.0271 mL | 0.1354 mL | 0.2707 mL | 0.6768 mL |
Tetrabutylammonium iodide Related Classifications
HY-Y0791 Related Classifications
Powered by Bioz