Antifungal agent 143
Based on 1 Customer Validation
Antifungal agent 143 is potent antifungal agent which also exihibits antibacterial activity. Antifungal agent 143 inhibits growth of Candida albicans and Aspergillus niger, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Streptococcus pyogenes. Antifungal agent 143 can be used for antimicrobial research.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.69%
- CAS. Nr.: 109532-65-2
- Formel: C9H5N3OS2
- Molecular Weight:235.28
-
Speicherung:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Antifungal agent 143 (compound 4m) shows antifungal activity against Candida albicans (MIC = 50 μg/mL) and Aspergillus niger (MIC = 100 μg/mL), and antibacterial activity against Escherichia coli (MIC = 100 μg/mL), Pseudomonas aeruginosa (MIC = 100 μg/mL), Staphylococcus aureus (MIC = 250 μg/mL), and Streptococcus pyogenes (MIC = 50 μg/mL)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 109532-65-2
-
Appearance Solid
-
Molecular Weight 235.28
-
Formel C9H5N3OS2
-
Color Light yellow to orange
-
SMILES
N#CC=1C(=O)NC(=S)NC1C=2SC=CC2
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Lösungsmittel & Löslichkeit
DMSO : ≥ 100 mg/mL (425.03 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (10.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (278 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.2503 mL | 21.2513 mL | 42.5026 mL | 106.2564 mL |
| 5 mM | 0.8501 mL | 4.2503 mL | 8.5005 mL | 21.2513 mL | |
| 10 mM | 0.4250 mL | 2.1251 mL | 4.2503 mL | 10.6256 mL | |
| 15 mM | 0.2834 mL | 1.4168 mL | 2.8335 mL | 7.0838 mL | |
| 20 mM | 0.2125 mL | 1.0626 mL | 2.1251 mL | 5.3128 mL | |
| 25 mM | 0.1700 mL | 0.8501 mL | 1.7001 mL | 4.2503 mL | |
| 30 mM | 0.1417 mL | 0.7084 mL | 1.4168 mL | 3.5419 mL | |
| 40 mM | 0.1063 mL | 0.5313 mL | 1.0626 mL | 2.6564 mL | |
| 50 mM | 0.0850 mL | 0.4250 mL | 0.8501 mL | 2.1251 mL | |
| 60 mM | 0.0708 mL | 0.3542 mL | 0.7084 mL | 1.7709 mL | |
| 80 mM | 0.0531 mL | 0.2656 mL | 0.5313 mL | 1.3282 mL | |
| 100 mM | 0.0425 mL | 0.2125 mL | 0.4250 mL | 1.0626 mL |
Antifungal agent 143 Related Classifications
HY-43806 Related Classifications
Powered by Bioz