DMCM hydrochloride
Based on 1 Customer Validation
DMCM hydrochloride is a nonselective full inverse agonist of benzodiazepine. DMCM shows bnding afinity at human recombinant GABAA αxβ3γ2 receptor subtypes with Kis of 10 nM, 13 nM, 7.5 nM, 2.2 nM for α1, α2, α3, and α5 receptors, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.11%
- CAS No.: 1215833-62-7
- Formule: C17H19ClN2O4
- Masse moléculaire:350.80
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-B0009
FlumazenilGABA Receptor Antagonist -
HY-103533
GabazineGABAA Antagonist -
HY-B0007
BaclofenGABABR Agonist -
HY-107994
Aminooxyacetic acid hemihydrochlorideGABA Receptor Inhibitor -
HY-105272
LoreclezoleGABAA Receptor Agonist -
HY-103531
CGP52432GABAB Antagonist -
HY-14426
L-655708GABA Receptor Inverse Agonist -
HY-19567
PK 11195Parasite Inhibitor -
HY-B0007R
Baclofen (Standard)GABABR Agonist -
HY-B0009R
Flumazenil (Standard)GABA Receptor Antagonist -
HY-100813
SaclofenGABAB Receptor Antagonist
Activité biologique
Description
IC50 & Target
Ki: 10 nM (GABAA α1 receptor), 13 nM (GABAA α2 receptor), 7.5 nM (GABAA α3 receptor), 2.2 nM (GABAA α5 receptor)[1]
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male γ2I77 mice[2]
-
Dosage:20 mg/kg and 60 mg/kg
-
Administration:Injected i.p.
-
Result:Produced modest anxiolytic-like effects.
Chemical Information
-
CAS No. 1215833-62-7
-
Appearance Solid
-
Masse moléculaire 350.80
-
Formule C17H19ClN2O4
-
Color Light green to green
-
SMILES
O=C(C1=C(CC)C2=C(C=N1)NC3=C2C=C(OC)C(OC)=C3)OC.[H]Cl
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
H2O : 25 mg/mL (71.27 mM; Need ultrasonic)
DMSO : 10 mg/mL (28.51 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1 mg/mL (2.85 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (2.85 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Chambers MS, et al. An orally bioavailable, functionally selective inverse agonist at the benzodiazepine site of GABAA alpha5 receptors with cognition enhancing properties. J Med Chem. 2004 Nov 18;47(24):5829-32. [Content Brief]
[2]. Leppä E, et al. Agonistic effects of the beta-carboline DMCM revealed in GABA(A) receptor gamma 2 subunit F77I point-mutated mice. Neuropharmacology. 2005 Mar;48(4):469-78. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.8506 mL | 14.2531 mL | 28.5063 mL | 71.2657 mL |
| 5 mM | 0.5701 mL | 2.8506 mL | 5.7013 mL | 14.2531 mL | |
| 10 mM | 0.2851 mL | 1.4253 mL | 2.8506 mL | 7.1266 mL | |
| 15 mM | 0.1900 mL | 0.9502 mL | 1.9004 mL | 4.7510 mL | |
| 20 mM | 0.1425 mL | 0.7127 mL | 1.4253 mL | 3.5633 mL | |
| 25 mM | 0.1140 mL | 0.5701 mL | 1.1403 mL | 2.8506 mL | |
| H2O | 30 mM | 0.0950 mL | 0.4751 mL | 0.9502 mL | 2.3755 mL |
| 40 mM | 0.0713 mL | 0.3563 mL | 0.7127 mL | 1.7816 mL | |
| 50 mM | 0.0570 mL | 0.2851 mL | 0.5701 mL | 1.4253 mL | |
| 60 mM | 0.0475 mL | 0.2376 mL | 0.4751 mL | 1.1878 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
DMCM hydrochloride Related Classifications
HY-100369A Related Classifications
Powered by Bioz