XMU-MP-3
Based on 1 Customer Validation
XMU-MP-3 is a potent non-covalent BTK inhibitor with IC50s of 10.7 nM and 17.0 nM for BTK WT and BTK C481S mutation in the presence of 10 μM ATP, respectively. XMU-MP-3 also induces apoptosis.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 95.78%
- CAS No.: 2031152-08-4
- Formule: C27H27F3N8O
- Masse moléculaire:536.55
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Kinase Inhibitor Library
HY-L009
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Blood Cancer Compound Library
HY-L079
-
Autoimmune Disease Compound Library
HY-L156
-
Cell Death Library
HY-L162
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
-
Anti-Rheumatic Arthritis Compound Library
HY-L210
-
Posttranslational Modification Library
HY-L226
Activité biologique
IC50: 10.7 nM (BTK WT), 17.0 nM (BTK C481S), Apoptosis[1]
XMU-MP-3 (0.001-10000 nM; 48 hours) inhibits BTK-transformed Ba/F3 cell proliferation with an IC50 of 11.4 nM[1].
XMU-MP-3 (1-10000 nM) inhibits the proliferation of JeKo-1, Ramos and NALM-6 with IC50 values of 326.6 nM, 685.6 nM and 1065 nM, respectively[1].
XMU-MP-3 (0.001-10000 nM) maintains inhibitory potency with an IC50 of 182.3 nM against BTK(C481S)-Ba/F3 cells[1].
XMU-MP-3 (5000 nM) induces apoptosis in BTK (C481S) Ba/F3 cells[1].
XMU-MP-3 (10-1000 nM; 4 hours) inhibits both the auto- and trans-phosphorylation of BTK at the site of Y223 and Y551 in a dose-dependent manner in BTK-transformed Ba/F3 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:BTK-transformed and parental Ba/F3 cells
-
Concentration:0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 nM
-
Incubation Time:48 hours
-
Result:Inhibited BTK-transformed Ba/F3 cell proliferation with an IC50 of 11.4 nM, while it showed negligible anti-proliferative effects on parental wild-type Ba/F3 cells (IC50 >10000 nM).
-
Cell Line:BTK-transformed Ba/F3 cells
-
Concentration:10, 50, 100, 500, 1000 nM
-
Incubation Time:4 hours
-
Result:The phosphorylation levels of BTK Y223 and Y551 were reduced significantly at concentrations as low as 100 nM, and completely suppressed at the concentration of 1000 nM.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Nu/nu BALB/c mice (4-6 weeks of age) bearing BTK-transformed Ba/F3 and Ramos xenograft models[1]
-
Dosage:25 and 50 mg/kg
-
Administration:Treated by tail vein injection; the injection volume was 0.1 mL per 10 g; daily for 14 days
-
Result:Significantly reduced the tumor size without affecting animal weights.
Chemical Information
-
CAS No. 2031152-08-4
-
Appearance Solid
-
Masse moléculaire 536.55
-
Formule C27H27F3N8O
-
Color Light yellow to brown
-
SMILES
O=C(NC1=CC=C(C)C(N2CC3=CN=C(NC4=CC(C)=NN4C)N=C3N(C)C2)=C1)C5=CC=CC(C(F)(F)F)=C5
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (186.38 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.66 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8638 mL | 9.3188 mL | 18.6376 mL | 46.5940 mL |
| 5 mM | 0.3728 mL | 1.8638 mL | 3.7275 mL | 9.3188 mL | |
| 10 mM | 0.1864 mL | 0.9319 mL | 1.8638 mL | 4.6594 mL | |
| 15 mM | 0.1243 mL | 0.6213 mL | 1.2425 mL | 3.1063 mL | |
| 20 mM | 0.0932 mL | 0.4659 mL | 0.9319 mL | 2.3297 mL | |
| 25 mM | 0.0746 mL | 0.3728 mL | 0.7455 mL | 1.8638 mL | |
| 30 mM | 0.0621 mL | 0.3106 mL | 0.6213 mL | 1.5531 mL | |
| 40 mM | 0.0466 mL | 0.2330 mL | 0.4659 mL | 1.1648 mL | |
| 50 mM | 0.0373 mL | 0.1864 mL | 0.3728 mL | 0.9319 mL | |
| 60 mM | 0.0311 mL | 0.1553 mL | 0.3106 mL | 0.7766 mL | |
| 80 mM | 0.0233 mL | 0.1165 mL | 0.2330 mL | 0.5824 mL | |
| 100 mM | 0.0186 mL | 0.0932 mL | 0.1864 mL | 0.4659 mL |
XMU-MP-3 Related Classifications
HY-136531 Related Classifications
Powered by Bioz