HuR degrader 2
Based on 1 Customer Validation
HuR degrader 2 is a molecular glue degrader targeting HuR (ELAVL1). HuR degrader 2 degrades the RNA-binding protein HuR. HuR degrader 2 can be used for the research of pancreatic ductal adenocarcinoma.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.47%
- CAS. Nr.: 3040301-46-7
- Formel: C20H15N3O3
- Molecular Weight:345.35
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Beschreibung
In Vitro
HuR degrader 2 (Compound 3) (0.1 μM; 6 h) potently degrades HuR protein in KP4 cells with a degradation rate of ≥70%, qualifying it as a class A potent HuR degrader[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
-
Cell Line:KP4 cells
-
Concentration:0.1 μM
-
Incubation Time:6 h
-
Result:Efficiently degraded HuR protein in KP4 cells with a degradation rate of 70%.
Chemical Information
-
CAS. Nr. 3040301-46-7
-
Appearance Solid
-
Molecular Weight 345.35
-
Formel C20H15N3O3
-
Color Off-white to light yellow
-
SMILES
O=C1NC(C(C2=COC3=C2C=CC(C4=C(C=CN5)C5=NC=C4)=C3)CC1)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (289.56 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (14.48 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (286 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8956 mL | 14.4781 mL | 28.9561 mL | 72.3903 mL |
| 5 mM | 0.5791 mL | 2.8956 mL | 5.7912 mL | 14.4781 mL | |
| 10 mM | 0.2896 mL | 1.4478 mL | 2.8956 mL | 7.2390 mL | |
| 15 mM | 0.1930 mL | 0.9652 mL | 1.9304 mL | 4.8260 mL | |
| 20 mM | 0.1448 mL | 0.7239 mL | 1.4478 mL | 3.6195 mL | |
| 25 mM | 0.1158 mL | 0.5791 mL | 1.1582 mL | 2.8956 mL | |
| 30 mM | 0.0965 mL | 0.4826 mL | 0.9652 mL | 2.4130 mL | |
| 40 mM | 0.0724 mL | 0.3620 mL | 0.7239 mL | 1.8098 mL | |
| 50 mM | 0.0579 mL | 0.2896 mL | 0.5791 mL | 1.4478 mL | |
| 60 mM | 0.0483 mL | 0.2413 mL | 0.4826 mL | 1.2065 mL | |
| 80 mM | 0.0362 mL | 0.1810 mL | 0.3620 mL | 0.9049 mL | |
| 100 mM | 0.0290 mL | 0.1448 mL | 0.2896 mL | 0.7239 mL |
HuR degrader 2 Related Classifications
HY-163759 Related Classifications
Powered by Bioz