SPDP-C6-NHS ester
Based on 1 Customer Validation
SPDP-C6-NHS ester is an alkyl/ether-based PROTAC linker that can be used in the synthesis of PROTACs.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.09%
- CAS No.: 158913-22-5
- Formule: C18H23N3O5S2
- Masse moléculaire:425.52
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-126495A
Sulfo-LC-SPDP sodiumADC Linker -
HY-130195
SPDP-PEG4-NHS ester -
HY-130157
3-(2-Pyridyldithio)propanoic AcidPROTAC Linkers -
HY-136135
(2-pyridyldithio)-PEG1-hydrazineADC Linker -
HY-126405
SMPTADC Linker -
HY-141359
(2-Pyridyldithio)-PEG4-alcoholPROTAC Linkers -
HY-135964
(2-pyridyldithio)-PEG4 acidADC Linker -
HY-141361
(2-Pyridyldithio)-PEG2-BocPROTAC Linkers
Voir tous les produits spécifiques à Isoform PROTAC Linkers
More
Activité biologique
Description
IC50 & Target
|
Alkyl/ether |
In Vitro
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 158913-22-5
-
Appearance Solid
-
Masse moléculaire 425.52
-
Formule C18H23N3O5S2
-
Color White to off-white
-
SMILES
O=C(CCCCCNC(CCSSC1=NC=CC=C1)=O)ON2C(CCC2=O)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (117.50 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (268 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3501 mL | 11.7503 mL | 23.5007 mL | 58.7516 mL |
| 5 mM | 0.4700 mL | 2.3501 mL | 4.7001 mL | 11.7503 mL | |
| 10 mM | 0.2350 mL | 1.1750 mL | 2.3501 mL | 5.8752 mL | |
| 15 mM | 0.1567 mL | 0.7834 mL | 1.5667 mL | 3.9168 mL | |
| 20 mM | 0.1175 mL | 0.5875 mL | 1.1750 mL | 2.9376 mL | |
| 25 mM | 0.0940 mL | 0.4700 mL | 0.9400 mL | 2.3501 mL | |
| 30 mM | 0.0783 mL | 0.3917 mL | 0.7834 mL | 1.9584 mL | |
| 40 mM | 0.0588 mL | 0.2938 mL | 0.5875 mL | 1.4688 mL | |
| 50 mM | 0.0470 mL | 0.2350 mL | 0.4700 mL | 1.1750 mL | |
| 60 mM | 0.0392 mL | 0.1958 mL | 0.3917 mL | 0.9792 mL | |
| 80 mM | 0.0294 mL | 0.1469 mL | 0.2938 mL | 0.7344 mL | |
| 100 mM | 0.0235 mL | 0.1175 mL | 0.2350 mL | 0.5875 mL |
SPDP-C6-NHS ester Related Classifications
HY-124377 Related Classifications
Powered by Bioz