Ipatasertib-NH2
Based on 1 Customer Validation
Ipatasertib-NH2 (GDC-0068-NH2;RG7440-NH2) is a ligand for target protein AKT for PROTAC (INY-03-041). INY-03-041 is composed of Ipatasertib-NH2, a ten-hydrocarbon linker, and a CRBN ligand Lenalidomide for E3 ubiquitin ligase.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.64%
- No. CAS: 1001382-14-4
- Fòrmula: C21H26ClN5O2
- Peso molecular:415.92
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Angiogenesis-Related Compound Library
HY-L088
-
Glucose Metabolism Compound Library
HY-L092
-
Target Protein Ligand Library
HY-L129
-
Heterocyclic Compound Library
HY-L138
-
Pain-Related Compound Library
HY-L139
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
-
PI3K/Akt/mTOR Compound Library
HY-L015
-
Stem Cell Signaling Compound Library
HY-L017
-
Anti-Cancer Compound Library
HY-L025
-
Autophagy Compound Library
HY-L029
-
Anti-Aging Compound Library
HY-L034
-
Oxygen Sensing Compound Library
HY-L045
-
Glycolysis Compound Library
HY-L058
-
Cytoskeleton Compound Library
HY-L060
-
Glutamine Metabolism Compound Library
HY-L064
-
Anti-Pancreatic Cancer Compound Library
HY-L077
Actividad biológica
AKT[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| LNCaP | IC50 |
1454 nM
Compound: 34
|
Inhibition of Akt1 in human LNCAP cells assessed as phosphorylation of PRAS40 at Thr246 after 1.5 hrs
Inhibition of Akt1 in human LNCAP cells assessed as phosphorylation of PRAS40 at Thr246 after 1.5 hrs
|
[PMID: 22934575] |
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1001382-14-4
-
Appearance Solid
-
Peso molecular 415.92
-
Fòrmula C21H26ClN5O2
-
Color White to light yellow
-
SMILES
O=C(N1CCN(C2=C([C@H](C)C[C@H]3O)C3=NC=N2)CC1)[C@@H](C4=CC=C(Cl)C=C4)CN
-
Synonyms
GDC-0068-NH2; RG7440-NH2
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (240.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4043 mL | 12.0215 mL | 24.0431 mL | 60.1077 mL |
| 5 mM | 0.4809 mL | 2.4043 mL | 4.8086 mL | 12.0215 mL | |
| 10 mM | 0.2404 mL | 1.2022 mL | 2.4043 mL | 6.0108 mL | |
| 15 mM | 0.1603 mL | 0.8014 mL | 1.6029 mL | 4.0072 mL | |
| 20 mM | 0.1202 mL | 0.6011 mL | 1.2022 mL | 3.0054 mL | |
| 25 mM | 0.0962 mL | 0.4809 mL | 0.9617 mL | 2.4043 mL | |
| 30 mM | 0.0801 mL | 0.4007 mL | 0.8014 mL | 2.0036 mL | |
| 40 mM | 0.0601 mL | 0.3005 mL | 0.6011 mL | 1.5027 mL | |
| 50 mM | 0.0481 mL | 0.2404 mL | 0.4809 mL | 1.2022 mL | |
| 60 mM | 0.0401 mL | 0.2004 mL | 0.4007 mL | 1.0018 mL | |
| 80 mM | 0.0301 mL | 0.1503 mL | 0.3005 mL | 0.7513 mL | |
| 100 mM | 0.0240 mL | 0.1202 mL | 0.2404 mL | 0.6011 mL |
Ipatasertib-NH2 Related Classifications
HY-130988 Related Classifications
Powered by Bioz