Hedgehog agonist 1
Based on 1 Customer Validation
Hh agonist 1 (compound 21k) is a potent Hedgehog (Hh) agonist, with an EC50 0.3 nM. Hh agonist 1 can be used for the research of stroke and other neurological disorders.
For research use only. We do not sell to patients.
- Purity: 98.78%
- CAS No.: 946002-48-8
- Formula: C29H28ClF2N3O2S
- Molecular Weight:556.07
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
EC50: 0.3 nM (Hh)[1].
Chemical Information
-
CAS No. 946002-48-8
-
Appearance Solid
-
Molecular Weight 556.07
-
Formula C29H28ClF2N3O2S
-
Color Off-white to light yellow
-
SMILES
O=C(C1=C(Cl)C2=C(F)C=CC(F)=C2S1)N(CC3=CC(C4=CC=NC=C4)=CC=C3OC)[C@H]5CC[C@H](NC)CC5
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 40 mg/mL (71.93 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.50 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7983 mL | 8.9917 mL | 17.9833 mL | 44.9584 mL |
| 5 mM | 0.3597 mL | 1.7983 mL | 3.5967 mL | 8.9917 mL | |
| 10 mM | 0.1798 mL | 0.8992 mL | 1.7983 mL | 4.4958 mL | |
| 15 mM | 0.1199 mL | 0.5994 mL | 1.1989 mL | 2.9972 mL | |
| 20 mM | 0.0899 mL | 0.4496 mL | 0.8992 mL | 2.2479 mL | |
| 25 mM | 0.0719 mL | 0.3597 mL | 0.7193 mL | 1.7983 mL | |
| 30 mM | 0.0599 mL | 0.2997 mL | 0.5994 mL | 1.4986 mL | |
| 40 mM | 0.0450 mL | 0.2248 mL | 0.4496 mL | 1.1240 mL | |
| 50 mM | 0.0360 mL | 0.1798 mL | 0.3597 mL | 0.8992 mL | |
| 60 mM | 0.0300 mL | 0.1499 mL | 0.2997 mL | 0.7493 mL |