PARG-IN-4
Based on 1 Customer Validation
PARG-IN-4 (Formula (A)) is an orally available PARG inhibitor (EC50=1.9 nM) with cell membrane permeability. PARG-IN-4 can effectively inhibit tumor growth in mouse models. PARG-IN-4 can be used in cancer research.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 98.50%
- CAS 番号: 2988890-20-4
- 分子式: C20H25F2N7O2S2
- 分子量:497.59
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
生物活性
EC50: 1.9 nM (Poly(ADP-ribose) Glycohydrolase (PARG))
PARG-IN-4 (Formula (A)) affects the cell viability of SNU601 and RMUGS cells with EC50 of 11 nM and 4.2 nM, respectively; and exhibits antiproliferative activity against ovarian and breast cancer cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Ovarian cancer cells: RMUG-S, Kuramochi, OBISE, OVMANA; Breast cancer cells: HCC1569, CAL851, HCC1937, HCC1954S
-
Concentration:IC50
-
Incubation Time:
-
Result:Exhibited anti-proliferative activity against ovarian cancer cells and breast cancer cells with IC50s of 8 nM (RMUG-S), 9 nM (Kuramochi), 50 nM (OVISE), 120 nM (OVMANA); 0.08 μM (HCC1569), 0.1 μM (CAL851), 0.22 μM (HCC1937), 0.37 μM (HCC1954), respectively.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:HBCx-34 Patient-derivedxenograft(PDX) Mouse Model: Female Athymic Nude-Foxnlnu mice[1]
-
Dosage:100 mg/kg, 10 mL/kg
-
Administration:po; QD×45
-
Result:Resulted tumor growth inhibition with TGI rate of 110%.
化学情報
-
CAS 番号 2988890-20-4
-
性状 Solid
-
分子量 497.59
-
分子式 C20H25F2N7O2S2
-
Color Light yellow to yellow
-
SMILES
CC1(CC1)NS(=O)(C2=CC(N3C[C@@H](N[C@H](C3)C)C)=C(C=NN4C5=NN=C(C(F)F)S5)C4=C2)=O
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 20 mg/mL (40.19 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2 mg/mL (4.02 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2 mg/mL (4.02 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (276 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0097 mL | 10.0484 mL | 20.0969 mL | 50.2422 mL |
| 5 mM | 0.4019 mL | 2.0097 mL | 4.0194 mL | 10.0484 mL | |
| 10 mM | 0.2010 mL | 1.0048 mL | 2.0097 mL | 5.0242 mL | |
| 15 mM | 0.1340 mL | 0.6699 mL | 1.3398 mL | 3.3495 mL | |
| 20 mM | 0.1005 mL | 0.5024 mL | 1.0048 mL | 2.5121 mL | |
| 25 mM | 0.0804 mL | 0.4019 mL | 0.8039 mL | 2.0097 mL | |
| 30 mM | 0.0670 mL | 0.3349 mL | 0.6699 mL | 1.6747 mL | |
| 40 mM | 0.0502 mL | 0.2512 mL | 0.5024 mL | 1.2561 mL |
PARG-IN-4 関連分類
HY-156881 関連分類
Powered by Bioz