Sucrose octaacetate
Based on 1 Customer Validation
Sucrose octaacetate is an acetylated derivative of sucrose with an intensely bitter tasting and can be used as bitter tasting surrogate. Sucrose octaacetate can be used as food additive and also used as an adhesive and plasticizer. Sucrose octaacetate also used in many pesticides, insecticides, and other toxic products as a deterrent to accidental poisoning. Sucrose octaacetate can also be used as an in situ seed and a soft template to synthesize polyaniline (PANI) nanofibers.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.0%
- CAS No.: 126-14-7
- 화학식: C28H38O19
- 분자량:678.59
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-119309R
Sucrose octaacetate (Standard)Bitter Additive -
HY-101461
Methyl-β-cyclodextrinCholesterol-removing Agent -
HY-127018
MaltoheptaoseOligosaccharide -
HY-N0299
Stachyose hydrateEndogenous Metabolite -
HY-N1938
D(+)-Raffinose pentahydrateBiofilm-inhibitory Agent -
HY-W013696
α-D-Cellobiose octaacetate, 98%Test Substrate -
HY-W106550
α-D-Galactose pentaacetateBiochemical Reagent -
HY-128737
Methyl β-D-GalactopyranosideGlycoside Scaffold -
HY-75279
N-Acetyl-β-neuraminic acid methyl esterDrug Derivative -
HY-W145527
Phenyl 1-thio-α-D-mannopyranoside 2,3,4,6-tetraacetateBiochemical Assay Reagent -
HY-W047299
Phenyl 2,3,4,6-tetra-O-acetyl-β-D-thioglucopyranoside, 98%Glycosyl Donor -
HY-W152363
1,2,3,4-Tetra-O-acetyl-alpha-L-fucopyranoseBiochemical Assay Reagent
Biological Activity
제품 설명
In Vitro
Sucrose octaacetate is nontoxic and has a number of uses based on its bitter taste. For example, sugar is rendered too bitter is eat at a concentration of 0.06% (w/w) Sucrose octaacetate. Sucrose octaacetate can form 255 different possible isomers and degradation products, all of which have a very low molar absorptivity[1].
Polyaniline (PANI) nanofibers and nanorods are obtained using 2 and 3 g Sucrose octaacetate, respectively. The nanostructures containing irregular-shaped agglomerates, such as particulate particles and scaffolds are observed with increasing the concentrations of Sucrose octaacetate. The presence of Sucrose octaacetate during polymerization could only induce a change in morphology, but could not influence the molecular structure of the resulting PANI. Compared with those derived with 1, 3, and 4 g Sucrose octaacetate, the polymerized PANI from 2 g Sucrose octaacetate possesses higher thermal stability and electrical conductivity due to its higher crystallinity and highly ordered structure[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 126-14-7
-
Appearance Solid
-
분자량 678.59
-
화학식 C28H38O19
-
Color White to off-white
-
SMILES
O=C(C)OC[C@H]([C@H]([C@@H]1OC(C)=O)OC(C)=O)O[C@@]1(COC(C)=O)O[C@@H]2[C@@H]([C@H]([C@@H]([C@H](O2)COC(C)=O)OC(C)=O)OC(C)=O)OC(C)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
용액&용해도
In Vitro:
DMSO : 100 mg/mL (147.36 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (285 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4736 mL | 7.3682 mL | 14.7364 mL | 36.8411 mL |
| 5 mM | 0.2947 mL | 1.4736 mL | 2.9473 mL | 7.3682 mL | |
| 10 mM | 0.1474 mL | 0.7368 mL | 1.4736 mL | 3.6841 mL | |
| 15 mM | 0.0982 mL | 0.4912 mL | 0.9824 mL | 2.4561 mL | |
| 20 mM | 0.0737 mL | 0.3684 mL | 0.7368 mL | 1.8421 mL | |
| 25 mM | 0.0589 mL | 0.2947 mL | 0.5895 mL | 1.4736 mL | |
| 30 mM | 0.0491 mL | 0.2456 mL | 0.4912 mL | 1.2280 mL | |
| 40 mM | 0.0368 mL | 0.1842 mL | 0.3684 mL | 0.9210 mL | |
| 50 mM | 0.0295 mL | 0.1474 mL | 0.2947 mL | 0.7368 mL | |
| 60 mM | 0.0246 mL | 0.1228 mL | 0.2456 mL | 0.6140 mL | |
| 80 mM | 0.0184 mL | 0.0921 mL | 0.1842 mL | 0.4605 mL | |
| 100 mM | 0.0147 mL | 0.0737 mL | 0.1474 mL | 0.3684 mL |
Sucrose octaacetate Related Classifications
HY-119309 Related Classifications
Powered by Bioz