MID-1
Based on 1 Customer Validation
MID-1 is a disruptor of MG53-IRS-1 (Mitsugumin 53-insulin receptor substrate-1) interaction. MID-1 disrupts molecular association of MG53 with IRS-1 and abolishes MG53-induced IRS-1 ubiquitination and degradation in skeletal muscle, leading to elevated IRS-1 expression level and increased insulin signaling and glucose uptake.
For research use only. We do not sell to patients.
- Purity: 99.36%
- CAS No.: 312608-54-1
- Formula: C12H11N3O4S
- Molecular Weight:293.30
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Kinase Inhibitor Library
HY-L009
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Clinical Compound Library
HY-L026
-
Anti-Aging Compound Library
HY-L034
-
Drug Repurposing Compound Library
HY-L035
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Metabolic Enzyme Compound Library
HY-L146
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
Anti-Brain Cancer Compound Library
HY-L188
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Biological Activity
MID-1 (5 μM; 24 h) increases the IRS-1 expression level in skeletal muscle by disrupting the MG53-IRS-1 interaction[1].
MID-1 (10 μM; 12 h) reduces the luciferase activity in HEK 293 cell line expressing NLUC-IRS-1 and CLUC-C14A[1].
MID-1 (1-20 μM; 12 h) disrupts the MG53-IRS-1 interaction but not MG53-FAK interaction in HEK 293 cells[1].
MID-1 (0.1-10 μM; 4-24 h) abolishes MG53-induced IRS-1 ubiquitination and degradation in HEK 293 cells[1].
MID-1 (5-10 μM; 24 h) increases insulin signaling and insulin-elicited glucose uptake in C2C12 myotubes[1].
MID-1 (5-10 μM; 24 h) enhances skeletal myogenesis[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:C2C12 myotubes
-
Concentration:5 μM
-
Incubation Time:24 h
-
Result:Increased the IRS-1 protein level.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 312608-54-1
-
Appearance Solid
-
Molecular Weight 293.30
-
Formula C12H11N3O4S
-
Color Orange to red
-
SMILES
O=C(NC1=NC=C([N+]([O-])=O)S1)C2=CC=C(OCC)C=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 31.25 mg/mL (106.55 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.08 mg/mL (7.09 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.4095 mL | 17.0474 mL | 34.0948 mL | 85.2370 mL |
| 5 mM | 0.6819 mL | 3.4095 mL | 6.8190 mL | 17.0474 mL | |
| 10 mM | 0.3409 mL | 1.7047 mL | 3.4095 mL | 8.5237 mL | |
| 15 mM | 0.2273 mL | 1.1365 mL | 2.2730 mL | 5.6825 mL | |
| 20 mM | 0.1705 mL | 0.8524 mL | 1.7047 mL | 4.2618 mL | |
| 25 mM | 0.1364 mL | 0.6819 mL | 1.3638 mL | 3.4095 mL | |
| 30 mM | 0.1136 mL | 0.5682 mL | 1.1365 mL | 2.8412 mL | |
| 40 mM | 0.0852 mL | 0.4262 mL | 0.8524 mL | 2.1309 mL | |
| 50 mM | 0.0682 mL | 0.3409 mL | 0.6819 mL | 1.7047 mL | |
| 60 mM | 0.0568 mL | 0.2841 mL | 0.5682 mL | 1.4206 mL | |
| 80 mM | 0.0426 mL | 0.2131 mL | 0.4262 mL | 1.0655 mL | |
| 100 mM | 0.0341 mL | 0.1705 mL | 0.3409 mL | 0.8524 mL |
MID-1 Related Classifications
HY-115461 Related Classifications
Powered by Bioz