Sabeluzole
Based on 1 Customer Validation
Sabeluzole (R 58735), a benzothiazol derivative, has antiischemic, antiepileptic, and cognitive-enhancing properties. Sabeluzole protects rat hippocampal neurons against NMDA- and glutamate-induced neurotoxicity via preventing tau expression. Sabeluzole enhances memory in rats, and prevents the amnesic effect of Chlordiazepoxide. Sabeluzole can be used fro research of Alzheimer's disease.
For research use only. We do not sell to patients.
- Purity: 99.82%
- CAS No.: 104383-17-7
- Formula: C22H26FN3O2S
- Molecular Weight:415.52
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Neuronal Signaling Compound Library
HY-L013
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Neuroprotective Compound Library
HY-L070
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Human Metabolite Library
HY-L123
-
Extracellular Vesicles (EVs) Compound Library
HY-L168
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
Biological Activity
Sabeluzole (50 nM, 100 nM; 20 min before cell injury) exhibits protection in glutamate (50 μM)-mediated excitotoxicity in primary culture of cerebellar granule cell[1].
Sabeluzole (50 nM; 7 d) inhibits tau protein level increase induced by glutamate[1].
Sabeluzole (50 nM; 4 d) shows neuroprotective effects in human neuroblastoma cell line SH-SY5Y[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Adult albino male rats (270-330 g) induced by Chlordiazepoxide[2]
-
Dosage:5 mg/kg, 25 mg/kg
-
Administration:SC; 0.5 ml/kg; twice dose with 72 h interval; 1 h before 20 mg/kg Chlordiazepoxide
-
Result:Showed the positive effects on several learning and memory tasks in rats.
Did not influence locomotor and rearing activity of animals during the acquisition session.
Chemical Information
-
CAS No. 104383-17-7
-
Appearance Solid
-
Molecular Weight 415.52
-
Formula C22H26FN3O2S
-
Color Off-white to light yellow
-
SMILES
CN(C1CCN(CC(O)COC2=CC=C(F)C=C2)CC1)C3=NC4=C(C=CC=C4)S3
-
Synonyms
R 58735
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 100 mg/mL (240.66 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Uberti D, et al. Priming of cultured neurons with sabeluzole results in long-lasting inhibition of neurotoxin-induced tau expression and cell death. Synapse. 1997 Jun;26(2):95-103. [Content Brief]
[2]. Hlinák Z,et al. Sabeluzole improves social recognition and antagonizes chlordiazepoxide's effect on habituation in the rat. Psychopharmacology (Berl). 1991;104(4):505-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4066 mL | 12.0331 mL | 24.0662 mL | 60.1656 mL |
| 5 mM | 0.4813 mL | 2.4066 mL | 4.8132 mL | 12.0331 mL | |
| 10 mM | 0.2407 mL | 1.2033 mL | 2.4066 mL | 6.0166 mL | |
| 15 mM | 0.1604 mL | 0.8022 mL | 1.6044 mL | 4.0110 mL | |
| 20 mM | 0.1203 mL | 0.6017 mL | 1.2033 mL | 3.0083 mL | |
| 25 mM | 0.0963 mL | 0.4813 mL | 0.9626 mL | 2.4066 mL | |
| 30 mM | 0.0802 mL | 0.4011 mL | 0.8022 mL | 2.0055 mL | |
| 40 mM | 0.0602 mL | 0.3008 mL | 0.6017 mL | 1.5041 mL | |
| 50 mM | 0.0481 mL | 0.2407 mL | 0.4813 mL | 1.2033 mL | |
| 60 mM | 0.0401 mL | 0.2006 mL | 0.4011 mL | 1.0028 mL | |
| 80 mM | 0.0301 mL | 0.1504 mL | 0.3008 mL | 0.7521 mL | |
| 100 mM | 0.0241 mL | 0.1203 mL | 0.2407 mL | 0.6017 mL |
Sabeluzole Related Classifications
HY-105022 Related Classifications
Powered by Bioz