YOK-1304
Based on 1 Customer Validation
YOK-1304 is a p62/Sequestosome-1/SQSTM1 ligand that binds to the p62-ZZ domain. YOK-1304 promotes p62 self-oligomerization and LC3 interaction to facilitate autophagic targeting and p62-dependent selective autophagy. YOK-1304 enhances autophagic flux, induces LC3 puncta formation and p62-LC3 colocalization, and serves as an autophagy-targeting ligand (ATL) that can be linked to target-binding ligands to generate AUTOTAC degraders. YOK-1304 is used in research on cervical cancer and pancreatic cancer.
For research use only. We do not sell to patients.
- Purity: 98.60%
- CAS No.: 2409960-03-6
- Formula: C28H35NO4
- Molecular Weight:449.58
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| ACHN | IC50 |
>20 μM
|
Cytotoxicity against human ACHN cells assessed as reduction in cell viability by water-soluble tetrazolium salt-based assay.
Cytotoxicity against human ACHN cells assessed as reduction in cell viability by water-soluble tetrazolium salt-based assay.
|
35173167 |
In Vitro
YOK-1304 (1 mM; 2 h) acts as an autophagy-targeting ligand that induces p62 self-oligomerization in HEK293T cells[1].
YOK-1304 (2.5 μM; 24 h) activates and targets p62 to autophagic membranes in HeLa cells, and enhances autophagic flux in HeLa cells[1].
YOK-1304 increases LC3 II accumulation but fails to degrade mutant KRAS in PANC-1, MIA PaCa-2, and SK-CO-1 cells, indicating that YOK-1304 alone is insufficient for KRAS degradation[2].
YOK-1304 (1 μM; 24 h) does not induce significant degradation of ERβ in MCF7 cells[1].
YOK-1304 shows low cytotoxicity in ACHN cells with an IC50 of >20 μM[1].
YOK-1304 alone does not alter the secondary structure of KRASG12D, indicating that mutant KRAS recognition is mediated by the KRB moiety[2].
YOK-1304 (20 µM; 12 h) induces p62-dependent selective autophagy in PANC-1 cells, as evidenced by increased LC3 puncta formation and p62-LC3 co-localization[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HeLa
-
Concentration:2.5 μM
-
Incubation Time:24 h
-
Result:Induced the formation and co-localization of p62 and LC3 punctate structures.
-
Cell Line:HeLa
-
Concentration:2.5 μM
-
Incubation Time:24 h
-
Result:Enhanced the autophagic turnover of p62 and LC3, with a normalized p62 autophagic flux index of 2.8 and a normalized LC3 II/I autophagic flux index of 4.2.
Chemical Information
-
CAS No. 2409960-03-6
-
Appearance Solid
-
Molecular Weight 449.58
-
Formula C28H35NO4
-
Color White to off-white
-
SMILES
CC(C)NC[C@@H](O)COC1=CC(OCCCC2=CC=CC=C2)=C(OCC3=CC=CC=C3)C=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (222.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2243 mL | 11.1215 mL | 22.2430 mL | 55.6075 mL |
| 5 mM | 0.4449 mL | 2.2243 mL | 4.4486 mL | 11.1215 mL | |
| 10 mM | 0.2224 mL | 1.1121 mL | 2.2243 mL | 5.5607 mL | |
| 15 mM | 0.1483 mL | 0.7414 mL | 1.4829 mL | 3.7072 mL | |
| 20 mM | 0.1112 mL | 0.5561 mL | 1.1121 mL | 2.7804 mL | |
| 25 mM | 0.0890 mL | 0.4449 mL | 0.8897 mL | 2.2243 mL | |
| 30 mM | 0.0741 mL | 0.3707 mL | 0.7414 mL | 1.8536 mL | |
| 40 mM | 0.0556 mL | 0.2780 mL | 0.5561 mL | 1.3902 mL | |
| 50 mM | 0.0445 mL | 0.2224 mL | 0.4449 mL | 1.1121 mL | |
| 60 mM | 0.0371 mL | 0.1854 mL | 0.3707 mL | 0.9268 mL | |
| 80 mM | 0.0278 mL | 0.1390 mL | 0.2780 mL | 0.6951 mL | |
| 100 mM | 0.0222 mL | 0.1112 mL | 0.2224 mL | 0.5561 mL |