AKR1C3-IN-9
Based on 1 Customer Validation
AKR1C3-IN-9 is a selective inhibitor of Aldo-keto Reductase 1C3 (AKR1C3) with an IC50 value of 8.92 nM. AKR1C3-IN-9 significantly reverses the Doxorubicin (HY-15142A) (DOX) resistance in a resistant breast cancer cell line.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.77%
- CAS. Nr.: 2924824-43-9
- Formel: C20H20N2O4
- Molecular Weight:352.38
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
|
AKR1C3 8.92 nM (IC50) |
AKR1C3-IN-9 (compound 24) (10-100 μM; 72 h and 96 h) results weak antiproliferative effect up to 100 μM in all three breast cancer cell lines (MDA-MB-231, MCF-7)[1].
AKR1C3-IN-9 (10 μM, 25 μM, and 50 μM; 72 h) synergistically inhibits the proliferation of MCF-7 cell with 10-50 μM DOX[1].
AKR1C3-IN-9 (10 μM; 8 d) synergistically inhibits the proliferation, clonogenic survival of MCF-7/DOX cell line, thus restores the sensitivity to DOX[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 2924824-43-9
-
Appearance Solid
-
Molecular Weight 352.38
-
Formel C20H20N2O4
-
Color White to off-white
-
SMILES
COC1=CC=CC=C1NC(C2=CC=CC=C2OCC3=C(ON=C3C)C)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 83.33 mg/mL (236.48 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8378 mL | 14.1892 mL | 28.3785 mL | 70.9461 mL |
| 5 mM | 0.5676 mL | 2.8378 mL | 5.6757 mL | 14.1892 mL | |
| 10 mM | 0.2838 mL | 1.4189 mL | 2.8378 mL | 7.0946 mL | |
| 15 mM | 0.1892 mL | 0.9459 mL | 1.8919 mL | 4.7297 mL | |
| 20 mM | 0.1419 mL | 0.7095 mL | 1.4189 mL | 3.5473 mL | |
| 25 mM | 0.1135 mL | 0.5676 mL | 1.1351 mL | 2.8378 mL | |
| 30 mM | 0.0946 mL | 0.4730 mL | 0.9459 mL | 2.3649 mL | |
| 40 mM | 0.0709 mL | 0.3547 mL | 0.7095 mL | 1.7737 mL | |
| 50 mM | 0.0568 mL | 0.2838 mL | 0.5676 mL | 1.4189 mL | |
| 60 mM | 0.0473 mL | 0.2365 mL | 0.4730 mL | 1.1824 mL | |
| 80 mM | 0.0355 mL | 0.1774 mL | 0.3547 mL | 0.8868 mL | |
| 100 mM | 0.0284 mL | 0.1419 mL | 0.2838 mL | 0.7095 mL |