NTPO
Based on 1 Customer Validation
NTPO (Nitrilotris methylenephosphonic acid) is a DNA damage inducer, causing genomic DNA damage and fragmentation, activating ATR-mediated cell cycle checkpoints. The DNA damaging effects of NTPO are abrogated by base excision repair (BER) but not nucleotide excision repair (NER).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- CAS. Nr.: 6419-19-8
- Formel: C3H12NO9P3
- Molecular Weight:299.05
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
Chemical Information
-
CAS. Nr. 6419-19-8
-
Appearance Liquid (Density: 2.094±0.06 g/cm3)
-
Molecular Weight 299.05
-
Formel C3H12NO9P3
-
Color Colorless to light yellow
-
SMILES
OP(CN(CP(O)(O)=O)CP(O)(O)=O)(O)=O
-
Synonyms
Nitrilotris(methylenephosphonic acid)
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (334.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (415 KB)
- English - EN (415 KB)
- Français - FR (415 KB)
- Deutsch - DE (415 KB)
- Norwegian - NO (415 KB)
- Español - ES (415 KB)
- Swedish - SV (415 KB)
- Italian - IT (415 KB)
- Korean - KR (415 KB)
- Portuguese - PT (415 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3439 mL | 16.7196 mL | 33.4392 mL | 83.5981 mL |
| 5 mM | 0.6688 mL | 3.3439 mL | 6.6878 mL | 16.7196 mL | |
| 10 mM | 0.3344 mL | 1.6720 mL | 3.3439 mL | 8.3598 mL | |
| 15 mM | 0.2229 mL | 1.1146 mL | 2.2293 mL | 5.5732 mL | |
| 20 mM | 0.1672 mL | 0.8360 mL | 1.6720 mL | 4.1799 mL | |
| 25 mM | 0.1338 mL | 0.6688 mL | 1.3376 mL | 3.3439 mL | |
| 30 mM | 0.1115 mL | 0.5573 mL | 1.1146 mL | 2.7866 mL | |
| 40 mM | 0.0836 mL | 0.4180 mL | 0.8360 mL | 2.0900 mL | |
| 50 mM | 0.0669 mL | 0.3344 mL | 0.6688 mL | 1.6720 mL | |
| 60 mM | 0.0557 mL | 0.2787 mL | 0.5573 mL | 1.3933 mL | |
| 80 mM | 0.0418 mL | 0.2090 mL | 0.4180 mL | 1.0450 mL | |
| 100 mM | 0.0334 mL | 0.1672 mL | 0.3344 mL | 0.8360 mL |