FBPase-IN-1
Based on 1 Customer Validation
FBPase-IN-1 is a potent FBPase (Fructose-1,6-bisphosphatase) inhibitor for Type 2 diabetes (T2D) study with an IC50 of 0.22 μM. FBPase-IN-1 can reduce blood glucose levels and ameliorate glucose tolerance. FBPase-IN-1 modifies the C128 site, regulates the N125-S124-S123 allosteric pathway of FBPase and affects the catalytic activity of FBPase.
For research use only. We do not sell to patients.
- Purity: 98.07%
- CAS No.: 20362-54-3
- Formula: C6H4N2S4
- Molecular Weight:232.37
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-diabetic Compound Library
HY-L040
-
Heterocyclic Compound Library
HY-L138
-
Metabolic Enzyme Compound Library
HY-L146
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Lactic Acid Metabolic Compound Library
HY-L204
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
IC50: 0.22 μM (FBPase)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HepG2 | IC50 |
75.08 μM
Compound: 3a
|
Cytotoxicity against human HepG2 cells assessed as reduction in cell viability measured after 48 hrs by cell counting kit-8 assay
Cytotoxicity against human HepG2 cells assessed as reduction in cell viability measured after 48 hrs by cell counting kit-8 assay
|
[PMID: 32711108] |
FBPase-IN-1 (compund 3a) (1.5625-200 μM, 48 hours) shows a low cytotoxicity with an IC50 of 75.08 μM[1].
FBPase-IN-1 (0-45 min) inhibits FBPase in a time-dependent manner, with IC50 decreasing from 0.28 to 0.09 μM, shows FBPase-IN-1 is an irreversible covalent inhibitor of FBPase[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
FBPase-IN-1 (6 or 7 weeks, ICR mice, n = 6, male, 25 mg/kg, IP for 4 hours, once) reduces blood glucose levels by targeting FBPase and inhibiting the GNG process[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:ICR mouse (12 h-fasted, n = 6, male)[1]
-
Dosage:25 mg/kg
-
Administration:IP, once
-
Result:Lowered glucose.
-
Animal Model:ICR mice (6 or 7 weeks, n = 6, male)[1]
-
Dosage:25 mg/kg
-
Administration:IP, for 4 h, once
-
Result:Reduced blood glucose levels by targeting FBPase and inhibiting the GNG process.
Chemical Information
-
CAS No. 20362-54-3
-
Appearance Solid
-
Molecular Weight 232.37
-
Formula C6H4N2S4
-
Color White to off-white
-
SMILES
C1(SSC2=NC=CS2)=NC=CS1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 50 mg/mL (215.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (10.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (10.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.3035 mL | 21.5174 mL | 43.0348 mL | 107.5870 mL |
| 5 mM | 0.8607 mL | 4.3035 mL | 8.6070 mL | 21.5174 mL | |
| 10 mM | 0.4303 mL | 2.1517 mL | 4.3035 mL | 10.7587 mL | |
| 15 mM | 0.2869 mL | 1.4345 mL | 2.8690 mL | 7.1725 mL | |
| 20 mM | 0.2152 mL | 1.0759 mL | 2.1517 mL | 5.3794 mL | |
| 25 mM | 0.1721 mL | 0.8607 mL | 1.7214 mL | 4.3035 mL | |
| 30 mM | 0.1434 mL | 0.7172 mL | 1.4345 mL | 3.5862 mL | |
| 40 mM | 0.1076 mL | 0.5379 mL | 1.0759 mL | 2.6897 mL | |
| 50 mM | 0.0861 mL | 0.4303 mL | 0.8607 mL | 2.1517 mL | |
| 60 mM | 0.0717 mL | 0.3586 mL | 0.7172 mL | 1.7931 mL | |
| 80 mM | 0.0538 mL | 0.2690 mL | 0.5379 mL | 1.3448 mL | |
| 100 mM | 0.0430 mL | 0.2152 mL | 0.4303 mL | 1.0759 mL |
FBPase-IN-1 Related Classifications
HY-146725 Related Classifications
Powered by Bioz