Cysteine thiol probe
Based on 1 publication(s) in Google Scholar
Cysteine Thiol Probe is a thiol-based probe designed to label electrophilic natural products. Cysteine Thiol Probe possesses each of the characteristics of an ideal pharmacophore probe, and has a chromophore. Cysteine Thiol Probe is capable of engaging enone-, β-lactam-, and β-lactone-based electrophilic metabolites.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.55%
- CAS No.: 1947408-74-3
- Formule: C11H12BrNO3S
- Masse moléculaire:318.19
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Cysteine thiol probe
More
Activité biologique
Description
In Vitro
Cysteine Thiol Probe (Probe 1) reacts much more readily with β-lactam- and β-lactone-based electrophilic natural products, and its reactivity with epoxide-based electrophilic natural products is poor. And probe 2 reacts much faster with epoxide-containing natural products. This orthogonal reactivity allows them to be employed in extracts simultaneously. Since Cysteine Thiol Probe is brominated and probe 2 is chlorinated, the isotopic patterns of labeled natural products point toward their structural origin. Competition experiments using Cysteine Thiol Probe and 2 indicated that brominated Cysteine Thiol Probe reacted exclusively with the β-lactam in penicillin G and the β-lactone in salinosporamide A while chlorinated probe 2 alone reacted with the epoxide in salinamide A[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 1947408-74-3
-
Appearance Solid
-
Masse moléculaire 318.19
-
Formule C11H12BrNO3S
-
Color White to off-white
-
SMILES
SC[C@@H](C(OC)=O)NC(C1=CC=C(Br)C=C1)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175
Solvant et solubilité
In Vitro:
DMSO : 250 mg/mL (785.69 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Castro-Falcón G, et al. Thiol Probes To Detect Electrophilic Natural Products Based on Their Mechanism of Action. ACS Chem Biol. 2016 Aug 19;11(8):2328-36. [Content Brief]
[2]. Reimer D, et al. Thiol-Based Probe for Electrophilic Natural Products Reveals That Most of the Ammosamides Are Artifacts. J Nat Prod. 2017 Jan 27;80(1):126-133. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1428 mL | 15.7139 mL | 31.4278 mL | 78.5694 mL |
| 5 mM | 0.6286 mL | 3.1428 mL | 6.2856 mL | 15.7139 mL | |
| 10 mM | 0.3143 mL | 1.5714 mL | 3.1428 mL | 7.8569 mL | |
| 15 mM | 0.2095 mL | 1.0476 mL | 2.0952 mL | 5.2380 mL | |
| 20 mM | 0.1571 mL | 0.7857 mL | 1.5714 mL | 3.9285 mL | |
| 25 mM | 0.1257 mL | 0.6286 mL | 1.2571 mL | 3.1428 mL | |
| 30 mM | 0.1048 mL | 0.5238 mL | 1.0476 mL | 2.6190 mL | |
| 40 mM | 0.0786 mL | 0.3928 mL | 0.7857 mL | 1.9642 mL | |
| 50 mM | 0.0629 mL | 0.3143 mL | 0.6286 mL | 1.5714 mL | |
| 60 mM | 0.0524 mL | 0.2619 mL | 0.5238 mL | 1.3095 mL | |
| 80 mM | 0.0393 mL | 0.1964 mL | 0.3928 mL | 0.9821 mL | |
| 100 mM | 0.0314 mL | 0.1571 mL | 0.3143 mL | 0.7857 mL |
Cysteine thiol probe Related Classifications
HY-135235 Related Classifications
Powered by Bioz