SSD114 hydrochloride
Based on 1 Customer Validation
SSD114 hydrochloride is a novel GABAB receptor positive allosteric modulator.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.13%
- CAS. Nr.: 2319790-02-6
- Formel: C18H21ClF3N3O
- Molecular Weight:387.83
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuronal Signaling Compound Library
HY-L013
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Neuroprotective Compound Library
HY-L070
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Targeted Diversity Library
HY-L099
-
Antidepressant Compound Library
HY-L108
-
GABA Receptor Compound Library
HY-L120
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Ion Channel Compound Library
HY-L166
-
Allosteric Modulators (AMs) Compound Library
HY-L170
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biologische Aktivität
GABAB receptor[1]
In the presence of 10 µM GABA, SSD114 hydrochloride at 25 µM significantly increases (to approximately 170% above basal levels) the [35S]GTPγS stimulation induced by GABA alone. SSD114 hydrochloride, added at 15 and 30 µM, induces a leftward shift of the GABA concentration-response curve with a slight concomitant increase of maximal GABA stimulation at the highest concentration. In the presence of both 15 and 30 µM SSD114 hydrochloride, the EC50 for GABA decreases by 2 and 2.5 fold, respectively, while the maximal stimulation (Emax) is potentiated only at the concentration of 30 µM, reaching 161±5.09% over the basal value[1] .
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 2319790-02-6
-
Appearance Solid
-
Molecular Weight 387.83
-
Formel C18H21ClF3N3O
-
Color White to off-white
-
SMILES
FC(C1=CC=C(C2=CC(OC)=NC(NC3CCCCC3)=N2)C=C1)(F)F.[H]Cl
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Lösungsmittel & Löslichkeit
DMSO : 130 mg/mL (335.20 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 2 mg/mL (5.16 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3.25 mg/mL (8.38 mM); Clear solution
This protocol yields a clear solution of ≥ 3.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 3.25 mg/mL (8.38 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 3.25 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Cells are transfected and seeded into 96-well microplates. 24 h after transfection, cells are washed twice with PBS and incubated in the presence or absence of SSD114 hydrochloride (different concentrations) for 15 min before substrate addition in a 96-well microplate. The Bioluminescence resonance energy transfer (BRET) ratio is calculated as the emission of YFP (530 to 570 nm) over the emission of RLuc (370 to 470 nm). The curves are fitted using Graph Pad Prism 5.0. The amplitude-weighted mean time constant is obtained by fitting the BRET recovery phase to a double exponential function. ΔBRET is calculated as the difference between the basal and the plateau of the BRET signal[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Male Sprague-Dawley rats and DBA mice, weighing 200 to 250 and 20 to 25 g, respectively, are used. On the test day, mice are divided into six groups (n=6 each) matched by body weight. Mice are treated acutely and intraperitoneally with 0, 1, 3, 10, 30, and 100 mg/kg SSD114 hydrochloride and sedation/hypnosis is measured. Specifically, after baclofen injection, each mouse is placed on its back once every 60 s until it is unable to right itself within 60 s. The time between baclofen injection and the start of the 60-s interval during which the mouse is unable to right itself is measured as the onset of loss of righting reflex (LORR). Each mouse is then left undisturbed on its back until it spontaneously regained its righting reflex (determined as having at least three paws under its body). Complete recovery of the righting reflex is defined as the mouse being able to turn itself upright twice more within 60 s. If this criterion is not fulfilled, the mouse is left undisturbed until it spontaneously regained its righting reflex. The time between loss and recovery of righting reflex is monitored in each mouse and defined as the duration of LORR. Observations are conducted by an operator unaware of the drug treatment[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.5784 mL | 12.8922 mL | 25.7845 mL | 64.4612 mL |
| 5 mM | 0.5157 mL | 2.5784 mL | 5.1569 mL | 12.8922 mL | |
| DMSO | 10 mM | 0.2578 mL | 1.2892 mL | 2.5784 mL | 6.4461 mL |
| 15 mM | 0.1719 mL | 0.8595 mL | 1.7190 mL | 4.2974 mL | |
| 20 mM | 0.1289 mL | 0.6446 mL | 1.2892 mL | 3.2231 mL | |
| 25 mM | 0.1031 mL | 0.5157 mL | 1.0314 mL | 2.5784 mL | |
| 30 mM | 0.0859 mL | 0.4297 mL | 0.8595 mL | 2.1487 mL | |
| 40 mM | 0.0645 mL | 0.3223 mL | 0.6446 mL | 1.6115 mL | |
| 50 mM | 0.0516 mL | 0.2578 mL | 0.5157 mL | 1.2892 mL | |
| 60 mM | 0.0430 mL | 0.2149 mL | 0.4297 mL | 1.0744 mL | |
| 80 mM | 0.0322 mL | 0.1612 mL | 0.3223 mL | 0.8058 mL | |
| 100 mM | 0.0258 mL | 0.1289 mL | 0.2578 mL | 0.6446 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
SSD114 hydrochloride Related Classifications
HY-103668A Related Classifications
Powered by Bioz