MRTF/SRF-IN-1
Based on 1 Customer Validation
MRTF/SRF-IN-1 (example 41) is an inhibitor of both myocardin-related transcription factor and serum response factor (MRTF/SRF). MRTF/SRF-IN-1 can be used for research for preventing cancer and fibrosis.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.68%
- CAS. Nr.: 1922098-90-5
- Formel: C24H19ClF3N3O2
- Molecular Weight:473.87
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
Chemical Information
-
CAS. Nr. 1922098-90-5
-
Appearance Solid
-
Molecular Weight 473.87
-
Formel C24H19ClF3N3O2
-
Color White to off-white
-
SMILES
O=C(N1CC(CC(F)(C1)F)C(NC2=CC=C(C=C2)Cl)=O)C3=CC(F)=CC(C4=CC=NC=C4)=C3
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (211.03 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (10.55 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (269 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1103 mL | 10.5514 mL | 21.1028 mL | 52.7571 mL |
| 5 mM | 0.4221 mL | 2.1103 mL | 4.2206 mL | 10.5514 mL | |
| 10 mM | 0.2110 mL | 1.0551 mL | 2.1103 mL | 5.2757 mL | |
| 15 mM | 0.1407 mL | 0.7034 mL | 1.4069 mL | 3.5171 mL | |
| 20 mM | 0.1055 mL | 0.5276 mL | 1.0551 mL | 2.6379 mL | |
| 25 mM | 0.0844 mL | 0.4221 mL | 0.8441 mL | 2.1103 mL | |
| 30 mM | 0.0703 mL | 0.3517 mL | 0.7034 mL | 1.7586 mL | |
| 40 mM | 0.0528 mL | 0.2638 mL | 0.5276 mL | 1.3189 mL | |
| 50 mM | 0.0422 mL | 0.2110 mL | 0.4221 mL | 1.0551 mL | |
| 60 mM | 0.0352 mL | 0.1759 mL | 0.3517 mL | 0.8793 mL | |
| 80 mM | 0.0264 mL | 0.1319 mL | 0.2638 mL | 0.6595 mL | |
| 100 mM | 0.0211 mL | 0.1055 mL | 0.2110 mL | 0.5276 mL |