Lanreotide acetate
Based on 1 Customer Validation
Lanreotide (BIM 23014) acetate is a somatostatin analogue with antineoplastic activity. Lanreotide acetate can be used for the research of carcinoid syndrome.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.78%
- CAS No.: 2378114-72-6
- Formule: C56H73N11O12S2
- Masse moléculaire:1156.38
-
Stockage:
Sealed storage, away from moisture and light, under nitrogen.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-P0036
OctreotideSomatostatin Receptor Agonist -
HY-17365
Octreotide acetateSomatostatin Receptor Agonist -
HY-50898
LapatinibEGFR/HER2 Inhibitor -
HY-10999
TrametinibMEK Inhibitor -
HY-10219
RapamycinmTOR Inhibitor -
HY-15463
ImatinibTyrosine Kinases Inhibitor -
HY-10997
IbrutinibBtk Inhibitor -
HY-15772
OsimertinibMutant-Selective EGFR Inhibitor -
HY-13011
AlectinibALK Inhibitor -
HY-13442
EribulinMicrotubule Inhibitor -
HY-10820
Pemetrexed -
HY-B1811
VasopressinCyclic Nonapeptide
Activité biologique
Description
In Vitro
Lanreotide (BIM 23014) (100? nM; 0-48 h) enhanced radiation-induced apoptosis[1].
Lanreotide results in a dose-dependent decrease in GH3 cell colony forming units. Lanreotide at concentrations of 1, 10, 100, and 1000 nM results in cell survival rates of 75, 56, 39 and 27% respectively. The IC50 is 57?nM[1].
Lanreotide inhibits GH-secreting pituitary adenoma cell proliferation and hormone release in vitro[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
-
Cell Line:GH3
-
Concentration:100 nM
-
Incubation Time:48 h, 24 h, or immediately (0 h) before radiation
-
Result:Increased apoptotic sub-G1 proportion compared with radiation alone.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male nude mice, 8 weeks old and 20–25 g in body weight (GH3 tumor-bearing nude mice)[1]
-
Dosage:2.5, 5, 10 mg/kg
-
Administration:Subcutaneous; daily for 5 days
-
Result:Produced tumor growth inhibition.
Chemical Information
-
CAS No. 2378114-72-6
-
Appearance Solid
-
Masse moléculaire 1156.38
-
Formule C56H73N11O12S2
-
Color White to off-white
-
Synonyms
BIM 23014 acetate
-
Sequence
{d-2nal}-Cys-Tyr-{d-Trp}-Lys-Val-Cys-Thr-NH2 (Disulfide bridge: Cys2-Cys7)
-
Sequence Shortening
{d-2nal}-CY-{d-Trp}-KVCT-NH2 (Disulfide bridge: Cys2-Cys7)
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Sealed storage, away from moisture and light, under nitrogen
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (86.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 25 mg/mL (21.62 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (285 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Ning S, et al. Lanreotide promotes apoptosis and is not radioprotective in GH3 cells.Endocr Relat Cancer. 2009 Sep;16(3):1045-55. [Content Brief]
[2]. Florio T, et al. Characterization of the intracellular mechanisms mediating somatostatin and lanreotide inhibition of DNA synthesis and growth hormone release from dispersed human GH-secreting pituitary adenoma cells in vitro.Clin Endocrinol (Oxf). 2003 Jul;59(1):115-28. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.8648 mL | 4.3238 mL | 8.6477 mL | 21.6192 mL |
| 5 mM | 0.1730 mL | 0.8648 mL | 1.7295 mL | 4.3238 mL | |
| 10 mM | 0.0865 mL | 0.4324 mL | 0.8648 mL | 2.1619 mL | |
| 15 mM | 0.0577 mL | 0.2883 mL | 0.5765 mL | 1.4413 mL | |
| 20 mM | 0.0432 mL | 0.2162 mL | 0.4324 mL | 1.0810 mL | |
| DMSO | 25 mM | 0.0346 mL | 0.1730 mL | 0.3459 mL | 0.8648 mL |
| 30 mM | 0.0288 mL | 0.1441 mL | 0.2883 mL | 0.7206 mL | |
| 40 mM | 0.0216 mL | 0.1081 mL | 0.2162 mL | 0.5405 mL | |
| 50 mM | 0.0173 mL | 0.0865 mL | 0.1730 mL | 0.4324 mL | |
| 60 mM | 0.0144 mL | 0.0721 mL | 0.1441 mL | 0.3603 mL | |
| 80 mM | 0.0108 mL | 0.0540 mL | 0.1081 mL | 0.2702 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Lanreotide acetate Related Classifications
HY-P1959A Related Classifications
Powered by Bioz