Emlenoflast sodium
Based on 1 Customer Validation
Emlenoflast (MCC7840) sodium, a sulfonylurea, is a potent and selective inhibitor of NLRP3 inflammasome, with an IC50 of <100 nM. Emlenoflast sodium can be used for the research of inflammatory diseases.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.31%
- CAS No.: 2380032-29-9
- 화학식: C19H23N4NaO3S
- 분자량:410.47
-
보관:
-20°C, sealed storage, away from moisture
* The compound is unstable in solutions, freshly prepared is recommended.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
HY-132831
SelnoflastNLRP3 Inhibitor -
HY-12815
MCC950NLRP3 Inhibitor -
HY-103666
CY-09NLRP3 Inhibitor -
HY-101868
INF39NLRP3 Inhibitor -
HY-18639
Nodinitib-1NOD-like Receptor (NLR) Inhibitor -
HY-139396
BMS-986299NLRP3 Agonist -
HY-100691
NOD-IN-1NLR Inhibitor -
HY-136555
GSK717NOD2 Inhibitor -
HY-17629
DapansutrileNLRP3 Inhibitor -
HY-12815A
MCC950 sodiumNLRP3 Inhibitor -
HY-N0496
RuscogeninNOD-like Receptor (NLR) Inhibitor -
HY-N0139
TroxerutinNOD-like Receptor (NLR) Inhibitor
Biological Activity
제품 설명
IC50 & Target
[1]|
NLRP3 inflammasome <100 nM (IC50) |
In Vitro
In Vivo
? Emlenoflast (20 mg/kg; p.o.) exhibits the oral bioavailability (67.2%), Cmax (60467 ng/mL) and half-life (5.02 h) in mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male C57BL/6 mice (7-9 weeks)[2]
-
Dosage:4 mg/kg for i.v. and 20 mg/kg for p.o. (Pharmacokinetic Analysis)
-
Administration:A single intravenousbolus or oral gavage
-
Result:I.v.: t1/2=3.39 h; AUC0-last=107097 ng•h/mL; CL=0.621 mL/min/kg.
P.o.: F=67.2%; Cmax=60467 ng/mL; t1/2=5.02 h.
Chemical Information
-
CAS No. 2380032-29-9
-
Appearance Solid
-
분자량 410.47
-
화학식 C19H23N4NaO3S
-
Color White to off-white
-
SMILES
O=S(C1=NN(C(C)C)C=C1)([N-]C(NC2=C3CCCC3=CC4=C2CCC4)=O)=O.[Na+]
-
Synonyms
MCC7840 sodium
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, sealed storage, away from moisture
* The compound is unstable in solutions, freshly prepared is recommended.
용액&용해도
In Vitro:
DMSO : 240 mg/mL (584.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6 mg/mL (14.62 mM); Clear solution
This protocol yields a clear solution of ≥ 6 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (60.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 6 mg/mL (14.62 mM); Clear solution
This protocol yields a clear solution of ≥ 6 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (60.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4362 mL | 12.1812 mL | 24.3623 mL | 60.9058 mL |
| 5 mM | 0.4872 mL | 2.4362 mL | 4.8725 mL | 12.1812 mL | |
| 10 mM | 0.2436 mL | 1.2181 mL | 2.4362 mL | 6.0906 mL | |
| 15 mM | 0.1624 mL | 0.8121 mL | 1.6242 mL | 4.0604 mL | |
| 20 mM | 0.1218 mL | 0.6091 mL | 1.2181 mL | 3.0453 mL | |
| 25 mM | 0.0974 mL | 0.4872 mL | 0.9745 mL | 2.4362 mL | |
| 30 mM | 0.0812 mL | 0.4060 mL | 0.8121 mL | 2.0302 mL | |
| 40 mM | 0.0609 mL | 0.3045 mL | 0.6091 mL | 1.5226 mL | |
| 50 mM | 0.0487 mL | 0.2436 mL | 0.4872 mL | 1.2181 mL | |
| 60 mM | 0.0406 mL | 0.2030 mL | 0.4060 mL | 1.0151 mL | |
| 80 mM | 0.0305 mL | 0.1523 mL | 0.3045 mL | 0.7613 mL | |
| 100 mM | 0.0244 mL | 0.1218 mL | 0.2436 mL | 0.6091 mL |
Emlenoflast sodium Related Classifications
HY-137245A Related Classifications
Powered by Bioz