Mal-amido-PEG1-C2-NHS ester
Based on 1 Customer Validation
Mal-amido-PEG1-C2-NHS ester is a nonclaevable ADC linker containing a maleimide group and an NHS ester. The NHS ester can be used to label the primary amines (-NH2) of proteins, amine-modified oligonucleotides, and other amine-containing molecules
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.69%
- CAS No.: 1260092-50-9
- Formule: C16H19N3O8
- Masse moléculaire:381.34
-
Stockage:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-W040134
Mal-amido-PEG4-NHS ester -
HY-W040289
Mal-amido-PEG2-NHS esterADC Linker -
HY-W040133
Mal-amido-PEG8-NHS ester -
HY-126509
Mal-amido-PEG10-C2-NHS esterADC Linker -
HY-W008879
Mal-amido-PEG6-NHS ester -
HY-140977
Mal-amido-PEG12-NHS ester -
HY-126508
Mal-amido-PEG5-C2-NHS ester -
HY-138729
Mal-amido-PEG3-NHS ester
Voir tous les produits spécifiques à Isoform ADC Linkers
More
Activité biologique
Description
Chemical Information
-
CAS No. 1260092-50-9
-
Appearance Solid
-
Masse moléculaire 381.34
-
Formule C16H19N3O8
-
Color White to off-white
-
SMILES
O=C(ON1C(CCC1=O)=O)CCOCCNC(CCN2C(C=CC2=O)=O)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (262.23 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.56 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.56 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6223 mL | 13.1117 mL | 26.2233 mL | 65.5583 mL |
| 5 mM | 0.5245 mL | 2.6223 mL | 5.2447 mL | 13.1117 mL | |
| 10 mM | 0.2622 mL | 1.3112 mL | 2.6223 mL | 6.5558 mL | |
| 15 mM | 0.1748 mL | 0.8741 mL | 1.7482 mL | 4.3706 mL | |
| 20 mM | 0.1311 mL | 0.6556 mL | 1.3112 mL | 3.2779 mL | |
| 25 mM | 0.1049 mL | 0.5245 mL | 1.0489 mL | 2.6223 mL | |
| 30 mM | 0.0874 mL | 0.4371 mL | 0.8741 mL | 2.1853 mL | |
| 40 mM | 0.0656 mL | 0.3278 mL | 0.6556 mL | 1.6390 mL | |
| 50 mM | 0.0524 mL | 0.2622 mL | 0.5245 mL | 1.3112 mL | |
| 60 mM | 0.0437 mL | 0.2185 mL | 0.4371 mL | 1.0926 mL | |
| 80 mM | 0.0328 mL | 0.1639 mL | 0.3278 mL | 0.8195 mL | |
| 100 mM | 0.0262 mL | 0.1311 mL | 0.2622 mL | 0.6556 mL |
Mal-amido-PEG1-C2-NHS ester Related Classifications
HY-126507 Related Classifications
Powered by Bioz