meso-Tetra(4-pyridyl)porphine
Based on 1 Customer Validation
meso-Tetra(4-pyridyl)porphine (Compound 10) is a porphyrin derivative. meso-Tetra(4-pyridyl)porphine is a weak inhibitor of human topoisomerase I (Top1) with an EC50 value greater than 50 µM. meso-Tetra(4-pyridyl)porphine can be used in tumor research.
For research use only. We do not sell to patients.
- Purity : 98.0%
- CAS No.: 16834-13-2
- Formula: C40H26N8
- Molecular Weight:618.70
-
Storage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
All Topoisomerase Isoforms
More
Biological Activity
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HeLa | IC50 |
>100 μM
Compound: 18
|
Cytotoxicity against human HeLa cells assessed as cell growth inhibition incubated for 48 hrs followed by fresh medium replacement without compound and further incubated for 44 hrs under dark condition by resazurin based fluorimetry
Cytotoxicity against human HeLa cells assessed as cell growth inhibition incubated for 48 hrs followed by fresh medium replacement without compound and further incubated for 44 hrs under dark condition by resazurin based fluorimetry
|
[PMID: 35050607] |
| HeLa | IC50 |
5.8 μM
Compound: 18
|
Photodynamic cytotoxicity against human HeLa cells assessed as cell growth inhibition incubated for 4 hrs followed by fresh medium replacement without compound upon 6.95 J/cm2 light irradiation for 15 mins and further incubated for 44 hrs by resazurin bas
Photodynamic cytotoxicity against human HeLa cells assessed as cell growth inhibition incubated for 4 hrs followed by fresh medium replacement without compound upon 6.95 J/cm2 light irradiation for 15 mins and further incubated for 44 hrs by resazurin bas
|
[PMID: 35050607] |
Chemical Information
-
CAS No. 16834-13-2
-
Appearance Solid
-
Molecular Weight 618.70
-
Formula C40H26N8
-
Color Purple to black
-
SMILES
C1(/C2=CC=NC=C2)=C3C=CC(/C(C4=CC=NC=C4)=C5C=C/C(N/5)=C(C6=CC=NC=C6)/C(C=C/7)=NC7=C(C8=CC=NC=C8)/C9=CC=C1N9)=N/3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
In Vitro:
DMSO : 12.5 mg/mL (20.20 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.02 mM); Suspended solution
This protocol yields a suspended solution of ≥ 1.25 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.02 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (287 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6163 mL | 8.0815 mL | 16.1629 mL | 40.4073 mL |
| 5 mM | 0.3233 mL | 1.6163 mL | 3.2326 mL | 8.0815 mL | |
| 10 mM | 0.1616 mL | 0.8081 mL | 1.6163 mL | 4.0407 mL | |
| 15 mM | 0.1078 mL | 0.5388 mL | 1.0775 mL | 2.6938 mL | |
| 20 mM | 0.0808 mL | 0.4041 mL | 0.8081 mL | 2.0204 mL |