WAY-213613 hydrochloride
Based on 3 publication(s) in Google Scholar
WAY-213613 (hydrochloride) is a potent and selective human EAAT2 inhibitor. WAY-213613 has potent EAAT2 inhibitory activity with an IC50 value of 85 nM. WAY-213613 can be used for the research of central nervous system.
For research use only. We do not sell to patients.
- Purity: 99.78%
- CAS No.: 2450268-84-3
- Formula: C16H14BrClF2N2O4
- Molecular Weight:451.65
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) WAY-213613 hydrochloride
More-
WB
Biological Activity
|
EAAT2 |
WAY-213613 (hydrochloride) (0-100 μM) has inhibitory activity for human EAAT1, EAAT2 and EAAT3 subtype with IC50 values of 5004 nM, 85 nM and 3787 nM, respectively[1].
??
WAY-213613 (3, 30, 300 nM) has the inhibitory effect on synaptosomal L-[3H] glutamate uptake with Ki values of 15 nM, 41 nM and 55 nM in the presence of 3, 30 and 300 nM, respectively[1].
WAY-213613 (0-100 μM) produces a concentration-dependent block of glutamate-induced currents in EAAT1-, EAAT2- or
EAAT3-injected oocytes, with IC50 values of 48, 0.13 and 4.0 μM, respectively[1].
WAY-213613 (0.5–50 μM) exhibits good selectivity over ionotropic receptors and EAAT2 and potent activity toward blocking NMDA-stimulated responses[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2450268-84-3
-
Appearance Solid
-
Molecular Weight 451.65
-
Formula C16H14BrClF2N2O4
-
Color White to off-white
-
SMILES
BrC(C=C(F)C(F)=C1)=C1OC2=CC=C(NC(C[C@H](N)C(O)=O)=O)C=C2.Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
2022 Jun 9;13(1):3329. PMID: 35680945 -
Physiol Behav
Acupuncture waggle needling alleviates spastic movement disorder in post-stroke rats via GLT-1 activation to modulate Glu/GABA-Gln cycle. [Abstract]2025 Aug 7:301:115059. PMID: 40783057 -
Ann Transl Med
Astrocytic histone deacetylase 2 facilitates delayed depression and memory impairment after subarachnoid hemorrhage by negatively regulating glutamate transporter-1. [Abstract]2020 Jun;8(11):691. PMID: 32617311
WAY-213613 hydrochloride purchased from MedChemExpress. Usage Cited in: Ann Transl Med. 2020 Jun;8(11):691. [Abstract]
The SAH mice are intraperitoneally administered with HDAC2 inhibitor (2 mg/kg) and GLT-1 inhibitor (WAY-213613, 1 mg/kg) two weeks after surgery once every other day. The expression of GLT-1, HDAC2, p-GluN2B and p-GluA1 in hippocampus is detected after SAH at 8 weeks.
Solvent & Solubility
DMSO : 50 mg/mL (110.71 mM; warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Dunlop J, et al. Characterization of novel aryl-ether, biaryl, and fluorene aspartic acid and diaminopropionic acid analogs as potent inhibitors of the high-affinity glutamate transporter EAAT2. Mol Pharmacol. 2005 Oct;68(4):974-82. Epub 2005 Jul 13. [Content Brief]
[2]. Simmons DA, et al. A small molecule p75NTR ligand, LM11A-31, reverses cholinergic neurite dystrophy in Alzheimer's disease mouse models with mid- to late-stage disease progression. PLoS One. 2014 Aug 25;9(8):e102136. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2141 mL | 11.0705 mL | 22.1410 mL | 55.3526 mL |
| 5 mM | 0.4428 mL | 2.2141 mL | 4.4282 mL | 11.0705 mL | |
| 10 mM | 0.2214 mL | 1.1071 mL | 2.2141 mL | 5.5353 mL | |
| 15 mM | 0.1476 mL | 0.7380 mL | 1.4761 mL | 3.6902 mL | |
| 20 mM | 0.1107 mL | 0.5535 mL | 1.1071 mL | 2.7676 mL | |
| 25 mM | 0.0886 mL | 0.4428 mL | 0.8856 mL | 2.2141 mL | |
| 30 mM | 0.0738 mL | 0.3690 mL | 0.7380 mL | 1.8451 mL | |
| 40 mM | 0.0554 mL | 0.2768 mL | 0.5535 mL | 1.3838 mL | |
| 50 mM | 0.0443 mL | 0.2214 mL | 0.4428 mL | 1.1071 mL | |
| 60 mM | 0.0369 mL | 0.1845 mL | 0.3690 mL | 0.9225 mL | |
| 80 mM | 0.0277 mL | 0.1384 mL | 0.2768 mL | 0.6919 mL | |
| 100 mM | 0.0221 mL | 0.1107 mL | 0.2214 mL | 0.5535 mL |