ZM223 hydrochloride
Based on 1 Customer Validation
ZM223 hydrochloride is an orally active, potent non-covalent NEDD8 activating enzyme (NAE) inhibitor with excellent anticancer activity.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.93%
- CAS No.: 2438679-27-5
- Formule: C23H18ClF3N4O2S2
- Masse moléculaire:538.99
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
NEDD8 activating enzyme (NAE)[1]
ZM223 hydrochloride (0.1-1 μM; 4 hours) inhibits both HCT-116 and U-2OS cancer cells with IC50s of 100 and 122 nM, respectively[1]. ZM223 hydrochloride (0.1-1 μM; 4 hours) causes a dose-response decrease in the level of NEDD8 and accumulation of the UBC12 protein, indicating the decrease of the subsequent NEDD8-UBC12 complex[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HCT116 colon cancer cells and U-2OS osteosarcoma cells
-
Concentration:0.1 μM, 1 μM
-
Incubation Time:4 hours
-
Result:Inhibited both HCT-116 and U-2OS cancer cells.
-
Cell Line:HCT116 colon cancer cells
-
Concentration:0.1 μM, 1 μM
-
Incubation Time:4 hours
-
Result:Caused a decrease in the level of NEDD8 and an increase in the downstream UBC12 protein.
Chemical Information
-
CAS No. 2438679-27-5
-
Appearance Solid
-
Masse moléculaire 538.99
-
Formule C23H18ClF3N4O2S2
-
Color White to off-white
-
SMILES
O=C(C1=CC=C(C(F)(F)F)C=C1)NC2=NC3=CC=C(NC(CSC4=CC=C(N)C=C4)=O)C=C3S2.[H]Cl
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
DMSO : 150 mg/mL (278.30 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 7.5 mg/mL (13.91 mM); Clear solution
This protocol yields a clear solution of ≥ 7.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (75.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 7.5 mg/mL (13.91 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 7.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (75.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8553 mL | 9.2766 mL | 18.5532 mL | 46.3831 mL |
| 5 mM | 0.3711 mL | 1.8553 mL | 3.7106 mL | 9.2766 mL | |
| 10 mM | 0.1855 mL | 0.9277 mL | 1.8553 mL | 4.6383 mL | |
| 15 mM | 0.1237 mL | 0.6184 mL | 1.2369 mL | 3.0922 mL | |
| 20 mM | 0.0928 mL | 0.4638 mL | 0.9277 mL | 2.3192 mL | |
| 25 mM | 0.0742 mL | 0.3711 mL | 0.7421 mL | 1.8553 mL | |
| 30 mM | 0.0618 mL | 0.3092 mL | 0.6184 mL | 1.5461 mL | |
| 40 mM | 0.0464 mL | 0.2319 mL | 0.4638 mL | 1.1596 mL | |
| 50 mM | 0.0371 mL | 0.1855 mL | 0.3711 mL | 0.9277 mL | |
| 60 mM | 0.0309 mL | 0.1546 mL | 0.3092 mL | 0.7731 mL | |
| 80 mM | 0.0232 mL | 0.1160 mL | 0.2319 mL | 0.5798 mL | |
| 100 mM | 0.0186 mL | 0.0928 mL | 0.1855 mL | 0.4638 mL |
ZM223 hydrochloride Related Classifications
HY-101790A Related Classifications
Powered by Bioz