2-Hydroxyisobutyryl-CoA
Based on 1 Customer Validation
2-Hydroxyisobutyryl-CoA is a hydroxy fatty acyl-CoA. 2-Hydroxyisobutyryl-CoA mutase forms the isomer (S)-3-hydroxybutyryl-CoA.
For research use only. We do not sell to patients.
- Purity: 97.79%
- CAS No.: 1383119-39-8
- Formula: C25H42N7O18P3S
- Molecular Weight:853.62
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 1383119-39-8
-
Appearance Solid
-
Molecular Weight 853.62
-
Formula C25H42N7O18P3S
-
Color White to off-white
-
SMILES
CC(C)(O)C(SCCNC(CCNC([C@H](O)C(C)(C)COP(OP(OC[C@@H]1[C@@H](OP(O)(O)=O)[C@@H](O)[C@H](N2C3=NC=NC(N)=C3N=C2)O1)(O)=O)(O)=O)=O)=O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
DMSO : 100 mg/mL (117.15 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.93 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.93 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.1715 mL | 5.8574 mL | 11.7148 mL | 29.2870 mL |
| 5 mM | 0.2343 mL | 1.1715 mL | 2.3430 mL | 5.8574 mL | |
| 10 mM | 0.1171 mL | 0.5857 mL | 1.1715 mL | 2.9287 mL | |
| 15 mM | 0.0781 mL | 0.3905 mL | 0.7810 mL | 1.9525 mL | |
| 20 mM | 0.0586 mL | 0.2929 mL | 0.5857 mL | 1.4644 mL | |
| 25 mM | 0.0469 mL | 0.2343 mL | 0.4686 mL | 1.1715 mL | |
| 30 mM | 0.0390 mL | 0.1952 mL | 0.3905 mL | 0.9762 mL | |
| 40 mM | 0.0293 mL | 0.1464 mL | 0.2929 mL | 0.7322 mL | |
| 50 mM | 0.0234 mL | 0.1171 mL | 0.2343 mL | 0.5857 mL | |
| 60 mM | 0.0195 mL | 0.0976 mL | 0.1952 mL | 0.4881 mL | |
| 80 mM | 0.0146 mL | 0.0732 mL | 0.1464 mL | 0.3661 mL | |
| 100 mM | 0.0117 mL | 0.0586 mL | 0.1171 mL | 0.2929 mL |
Powered by Bioz