1. Cytochalasin B

Cytochalasin B  (Synonyms: Phomin)

製品番号: HY-16928 純度: 99.81%
COA 取扱説明書

Cytochalasin B is a cell-permeable mycotoxin binding to the barbed end of actin filaments, disrupting the formation of actin polymers, with Kd value of 1.4-2.2 nM for F-actin. Cytochalasin B blocks cell migration.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Cytochalasin B 構造式

Cytochalasin B 構造式

CAS 番号 : 14930-96-2

容量 価格(税別) 在庫状況 数量
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
USD 359 在庫あり
Solution
10 mM * 1 mL in DMSO USD 359 在庫あり
Solid
1 mg USD 80 在庫あり
5 mg USD 340 在庫あり
10 mg USD 620 在庫あり
50 mg   お問い合わせ  
100 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 26 publication(s) in Google Scholar

Top Publications Citing Use of Products

    Cytochalasin B purchased from MedChemExpress. Usage Cited in: Adv Sci (Weinh). 2020 Jun 17;7(15):1903583.  [Abstract]

    Immunofluorescence imaging of LNCaP cells treated with the Cytoskeleton B (CB), Nocodazole (NO), PF-573288 (PF), Y-27632 (Y), and (-)-Blebbistatin ( (-) Bl). After the cells are cultured on different substrates for 3 days, inhibitors are added and incubated for 24 h.

    Cytochalasin B purchased from MedChemExpress. Usage Cited in: Adv Sci (Weinh). 2020 Jun 17;7(15):1903583.  [Abstract]

    Expression of CTC cluster-related (plakoglobin and CD44) and EMT-related (vimentin and E-cadherin, 4 days) proteins in LNCaP cells grown on different substrates after treatment with different inhibitors (Cytoskeleton B (CB), Nocodazole (NO), PF-573288 (PF), Y-27632 (Y), and (-)-Blebbistatin ((-) Bl)).
    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • カスタマーレビュー

    製品説明

    Cytochalasin B is a cell-permeable mycotoxin binding to the barbed end of actin filaments, disrupting the formation of actin polymers, with Kd value of 1.4-2.2 nM for F-actin. Cytochalasin B blocks cell migration.

    IC50 & Target

    Kd: 2.2 nM (F-actin, with Mg2+), 1.4 nM (F-actin, with Mg2+/K+)[1]

    体外実験

    Cytochalasin B is a cell-permeable mycotoxin binding to the barbed end of actin filaments, inhibits the enlongation and shortening of actin filaments, with Kds of 2.2 nM and 1.4 nM for F-actin in the presence of MgCl2 (2 mM) or MgCl2 (2 mM) plus KCl, respectively[1]. Cytochalasin B (0.1-10 μM) shows inhibitory effect on multiple murine cancer cell lines, with IC50s of 2.56 μM (M109c), 10.46 μM (B16BL6), 105.5 μM (P388/ADR), 51.9 μM (P388/S) and IC80s of 12.23 μM (M109c), 44.86 μM (B16BL6), 188.4 μM (P388/ADR), 84.1 μM (P388/S) after treatment for 3 h, with IC50s of 0.25 μM (M109c), 0.37 μM (B16F10), 0.87 μM (B16BL6), and IC80s of 0.75 μM (M109c), 1.21 μM (B16F10), 10.41 μM (B16BL6) after treatment for 4 days[2]. Cytochalasin B (6 μM) increases the myofibrillar fragmentation index (MFI), which is attributed to the intensely breaking of myofibrillar proteins into short segments. Cytochalasin B also accelerates the disruption of actin filaments. In addition, Cytochalasin B accelerates the transformation from F-actin to G-actin, lowering the content of F-actin and significantly increasing G-actin bands during postmortem conditioning[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    体内実験

    Cytochalasin B (10, 25, 50 mg/kg, i.p.) dose-dependently increases the life expectancy of Balb/c mice bearing with P388/ADR leukemias. Cytochalasin B at 50 mg/kg produces 10 % long-term survival in the multidrug resistant P388/ADR cohort, and 40 % long-term survival in the drug sensitive P388/S cohort[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    臨床実験
    分子量

    479.61

    分子式

    C29H37NO5

    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O=C1N[C@@H](CC2=CC=CC=C2)[C@@]3([H])[C@]14[C@](/C=C/C[C@H](C)CCC[C@@H](O)/C=C/C(O4)=O)([H])[C@H](O)C([C@H]3C)=C

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 83.33 mg/mL (173.75 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Ethanol : 25 mg/mL (52.13 mM; Need ultrasonic)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.0850 mL 10.4251 mL 20.8503 mL
    5 mM 0.4170 mL 2.0850 mL 4.1701 mL
    10 mM 0.2085 mL 1.0425 mL 2.0850 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% EtOH    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.21 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% EtOH    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (5.21 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  0.5% CMC-Na  0.5% Tween-80

      Solubility: 5 mg/mL (10.43 mM); Suspened solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.84%

    細胞実験
    [2]

    The attached cell lines M109c, B16BL6, and B16F10 are seeded at 1 to 4 × 104 cells/mL in 2 mL volumes in 24-well culture plates 1 day prior to treatment with Cytochalasin B. The suspension culture of P388/ADR cells is seeded at 5 × 104 cells/mL and allowed to grow overnight before Cytochalasin B treatment. Cells are treated with Cytochalasin B for 3 h, as well as 2, 3, or 4 days. In the case of continuous exposure for 2, 3, or 4 days, attached cells are trypsinized and counted with a hemacytometer. Leukemia cell suspensions are counted with a Coulter Counter. In the case of short-term exposure, cells are washed twice with fresh medium, then trypsinized (except for P388/ADR cells), reseeded, and allowed to regrow for 3 days, at which time they are counted. Growth results are calculated as the number of cells generated above the seeding density compared to the untreated control cells and graphically presented as percent of control increase[2].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    動物実験
    [2]

    Mice[2]
    For chemotherapy testing, Balb/c mice under isoflurane anesthesia are challenged with 2 × 105 trypan blue negative P388/S or P388/ADR cells subcutaneously (s.c.) in a volume of 200 μL. Untreated mice are kept in order to determine the lethality of the challenge without chemotherapeutic intervention. Long-term survival is defined as challenged mice that survive the duration of the observation period. Cytochalasins B and D are prepared in suspension form in 2 % carboxymethyl cellulose 1 % tween 20 (CMC/Tw) for intraperitoneal (i.p.) administration. The congeners or the vehicle are administered to leukemia-challenged mice on Days 1-8 following the initial challenge[2].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    Ethanol / DMSO 1 mM 2.0850 mL 10.4251 mL 20.8503 mL 52.1257 mL
    5 mM 0.4170 mL 2.0850 mL 4.1701 mL 10.4251 mL
    10 mM 0.2085 mL 1.0425 mL 2.0850 mL 5.2126 mL
    15 mM 0.1390 mL 0.6950 mL 1.3900 mL 3.4750 mL
    20 mM 0.1043 mL 0.5213 mL 1.0425 mL 2.6063 mL
    25 mM 0.0834 mL 0.4170 mL 0.8340 mL 2.0850 mL
    30 mM 0.0695 mL 0.3475 mL 0.6950 mL 1.7375 mL
    40 mM 0.0521 mL 0.2606 mL 0.5213 mL 1.3031 mL
    50 mM 0.0417 mL 0.2085 mL 0.4170 mL 1.0425 mL
    DMSO 60 mM 0.0348 mL 0.1738 mL 0.3475 mL 0.8688 mL
    80 mM 0.0261 mL 0.1303 mL 0.2606 mL 0.6516 mL
    100 mM 0.0209 mL 0.1043 mL 0.2085 mL 0.5213 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    タイトル

    お名前 *

     

    PC 用メールアドレス *

    電話番号 *

     

    勤務先/学校名 *

    Department *

     

    カスタマ需要量 *

    国会或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    メッセージ

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Cytochalasin B
    製品番号:
    HY-16928
    数量:
    MCE 日本正規代理店: