Arachidonoyl Serinol
Arachidonoyl Serinol, an endogenous cannabimimetic metabolite, is an inhibitor of monoacylglycerol lipase (MAGL). Arachidonoyl Serinol inhibits the hydrolysis of [3H]2-oleoylglycerol and [3H]anandamide with IC50s of ~70 μM.
For research use only. We do not sell to patients.
- CAS No.: 183718-70-9
- Formula: C23H39NO3
- Molecular Weight:377.56
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
monoacylglycerol lipase (MAGL)[1]
Arachidonoyl Serinol (0.2-100 μM) inhibits the hydrolysis of [3H]2-oleoylglycerol and [3H]anandamide with IC50s of ~70 μM[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 183718-70-9
-
Appearance Solid
-
Molecular Weight 377.56
-
Formula C23H39NO3
-
Color Off-white to light yellow
-
SMILES
O=C(CCC/C=C\C/C=C\C/C=C\C/C=C\CCCCC)NC(CO)CO
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (264.86 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.62 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.62 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (266 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Khanolkar AD, et, al. Head group analogs of arachidonylethanolamide, the endogenous cannabinoid ligand. J Med Chem. 1996 Oct 25;39(22):4515-9. [Content Brief]
[2]. Fowler CJ, et, al. Cyclooxygenation of the arachidonoyl side chain of 1-arachidonoylglycerol and related compounds block their ability to prevent anandamide and 2-oleoylglycerol metabolism by rat brain in vitro. Biochem Pharmacol. 2005 Apr 15;69(8):1241-5. [Content Brief]
[3]. Ghafouri N, et, al. Inhibition of monoacylglycerol lipase and fatty acid amide hydrolase by analogues of 2-arachidonoylglycerol. Br J Pharmacol. 2004 Nov;143(6):774-84. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6486 mL | 13.2429 mL | 26.4859 mL | 66.2146 mL |
| 5 mM | 0.5297 mL | 2.6486 mL | 5.2972 mL | 13.2429 mL | |
| 10 mM | 0.2649 mL | 1.3243 mL | 2.6486 mL | 6.6215 mL | |
| 15 mM | 0.1766 mL | 0.8829 mL | 1.7657 mL | 4.4143 mL | |
| 20 mM | 0.1324 mL | 0.6621 mL | 1.3243 mL | 3.3107 mL | |
| 25 mM | 0.1059 mL | 0.5297 mL | 1.0594 mL | 2.6486 mL | |
| 30 mM | 0.0883 mL | 0.4414 mL | 0.8829 mL | 2.2072 mL | |
| 40 mM | 0.0662 mL | 0.3311 mL | 0.6621 mL | 1.6554 mL | |
| 50 mM | 0.0530 mL | 0.2649 mL | 0.5297 mL | 1.3243 mL | |
| 60 mM | 0.0441 mL | 0.2207 mL | 0.4414 mL | 1.1036 mL | |
| 80 mM | 0.0331 mL | 0.1655 mL | 0.3311 mL | 0.8277 mL | |
| 100 mM | 0.0265 mL | 0.1324 mL | 0.2649 mL | 0.6621 mL |