ML283
Based on 1 Customer Validation
ML283 is a HCV NS3 helicase inhibitor (IC50: 2.6 μM). ML283 also inhibits DenV ATPase (IC50: 4.0 μM).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.48%
- CAS. Nr.: 1403245-31-7
- Formel: C28H21ClN4O4S3
- Molecular Weight:609.14
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
-
Help & FAQs
Biologische Aktivität
Chemical Information
-
CAS. Nr. 1403245-31-7
-
Appearance Solid
-
Molecular Weight 609.14
-
Formel C28H21ClN4O4S3
-
Color Light yellow to yellow
-
SMILES
O=C(C1=CC(Cl)=CC=C1)NC2=CC=C(C3=NC4=CC=C(C5=NC6=C(S5)C(S(=O)(O)=O)=C(C)C=C6)C=C4S3)C=C2.N
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (164.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (243 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6417 mL | 8.2083 mL | 16.4166 mL | 41.0415 mL |
| 5 mM | 0.3283 mL | 1.6417 mL | 3.2833 mL | 8.2083 mL | |
| 10 mM | 0.1642 mL | 0.8208 mL | 1.6417 mL | 4.1041 mL | |
| 15 mM | 0.1094 mL | 0.5472 mL | 1.0944 mL | 2.7361 mL | |
| 20 mM | 0.0821 mL | 0.4104 mL | 0.8208 mL | 2.0521 mL | |
| 25 mM | 0.0657 mL | 0.3283 mL | 0.6567 mL | 1.6417 mL | |
| 30 mM | 0.0547 mL | 0.2736 mL | 0.5472 mL | 1.3680 mL | |
| 40 mM | 0.0410 mL | 0.2052 mL | 0.4104 mL | 1.0260 mL | |
| 50 mM | 0.0328 mL | 0.1642 mL | 0.3283 mL | 0.8208 mL | |
| 60 mM | 0.0274 mL | 0.1368 mL | 0.2736 mL | 0.6840 mL | |
| 80 mM | 0.0205 mL | 0.1026 mL | 0.2052 mL | 0.5130 mL | |
| 100 mM | 0.0164 mL | 0.0821 mL | 0.1642 mL | 0.4104 mL |
ML283 Related Classifications
HY-173018 Related Classifications
Powered by Bioz